Difference between revisions of "H"

From TekWiki
Jump to navigation Jump to search
(add specs and history)
Line 1: Line 1:
 
The Tektronix Type H is a single-channel plug-in for [[500-series scopes]].  It provides two
 
The Tektronix Type H is a single-channel plug-in for [[500-series scopes]].  It provides two
inputs and has a switch to select between them.  The rise time of the plug-in is 20 nanoseconds.
+
inputs and has a switch to select between them.  The rise time of the plug-in is 20 nanoseconds; bandwidth is 15MHz.
The sensitivity ranges from 5mV/cm to 20V/cm.  The Type H uses a [[Turret attenuators|turret attenuator]].
+
The sensitivity ranges from 5mV/cm to 20V/cm.  A compromise, Type H is not as fast as Type [[B]], but it is DC-coupled on all ranges.
 +
Some Type H's use a [[Turret attenuators|turret attenuator]].
 +
 
 +
Type 53/54H was introduced in 1958, along with the [[533]] and [[543]].
  
 
* http://w140.com/tek_fcp/tek_type_h_factory_cal_proc.pdf
 
* http://w140.com/tek_fcp/tek_type_h_factory_cal_proc.pdf

Revision as of 17:20, 17 September 2010

The Tektronix Type H is a single-channel plug-in for 500-series scopes. It provides two inputs and has a switch to select between them. The rise time of the plug-in is 20 nanoseconds; bandwidth is 15MHz. The sensitivity ranges from 5mV/cm to 20V/cm. A compromise, Type H is not as fast as Type B, but it is DC-coupled on all ranges. Some Type H's use a turret attenuator.

Type 53/54H was introduced in 1958, along with the 533 and 543.