Difference between revisions of "H"

From TekWiki
Jump to navigation Jump to search
m
Line 12: Line 12:
 
* [http://w140.com/tek_fcp/tek_type_h_factory_cal_proc.pdf Tektronix Type H Factory Calibration Procedure (PDF)]
 
* [http://w140.com/tek_fcp/tek_type_h_factory_cal_proc.pdf Tektronix Type H Factory Calibration Procedure (PDF)]
 
}}
 
}}
The '''Tektronix Type H''' is a single-channel plug-in for [[500-series scopes]]. It provides two
+
The '''Tektronix Type H''' is a single-channel plug-in for [[500-series scopes]].
inputs and has a switch to select between them. The rise time of the plug-in is 20 ns, bandwidth is 15 MHz.
+
It provides two inputs and has a switch to select between them.
The sensitivity ranges from 5 mV/cm to 20 V/cm. A design compromise, Type H is not as  
+
The rise time of the plug-in is 20 ns, bandwidth is 15 MHz.
fast as [[B|Type B]], but it is DC-coupled on all ranges.
+
The sensitivity ranges from 5 mV/cm to 20 V/cm.
 +
A design compromise, Type H is not as fast as [[B|Type B]],
 +
but it is DC-coupled on all ranges.
  
 
Later Type H models use a [[Turret attenuators|turret attenuator]].  
 
Later Type H models use a [[Turret attenuators|turret attenuator]].  

Revision as of 20:46, 3 February 2018

Tektronix Type H
15 MHz amplifier plug-in
Tek Type H

Compatible with 500-series scopes

Produced from 1958 to 1971

Manuals
Manuals – Specifications – Links – Pictures

The Tektronix Type H is a single-channel plug-in for 500-series scopes. It provides two inputs and has a switch to select between them. The rise time of the plug-in is 20 ns, bandwidth is 15 MHz. The sensitivity ranges from 5 mV/cm to 20 V/cm. A design compromise, Type H is not as fast as Type B, but it is DC-coupled on all ranges.

Later Type H models use a turret attenuator. Type H with S/N less than 10,000 have ordinary attenuators.

Type 53/54H was introduced in 1958, along with the 533 and 543, renamed Type H in 1959, and dropped after 1970.

Pictures