Difference between revisions of "H"

From TekWiki
Jump to navigation Jump to search
Line 13: Line 13:
 
<!-- * [http://w140.com/tek_fcp/tek_type_h_factory_cal_proc.pdf Tektronix Type H Factory Calibration Procedure (PDF)] -->
 
<!-- * [http://w140.com/tek_fcp/tek_type_h_factory_cal_proc.pdf Tektronix Type H Factory Calibration Procedure (PDF)] -->
  
* [[Media:type_g_manual_110-008.pdf|Tektronix Type H Manual (sn 1102, PDF, OCR)]]
+
* [[Media:type_g_manual_110-008.pdf|Tektronix Type H Manual (sn 1102, PDF, OCR, pad-OCR)]]
 
<!-- * [[Media:070-272.pdf|Tektronix Type H Manual (later, PDF, OCR)]] -->
 
<!-- * [[Media:070-272.pdf|Tektronix Type H Manual (later, PDF, OCR)]] -->
 
* [[Media:tektronix_type_h_schem.pdf|Tektronix Type H Schematics Only (PDF, OCR)]]
 
* [[Media:tektronix_type_h_schem.pdf|Tektronix Type H Schematics Only (PDF, OCR)]]

Revision as of 16:59, 14 October 2018

Manuals – Specifications – Links – Pictures

The Tektronix Type H is a single-channel plug-in for 500-series scopes. It provides two inputs and has a switch to select between them. The rise time of the plug-in is 20 ns, bandwidth is 15 MHz. The sensitivity ranges from 5 mV/cm to 20 V/cm. A design compromise, Type H is not as fast as Type B, but it is DC-coupled on all ranges.

Later Type H models use a turret attenuator. Type H with S/N less than 10,000 have ordinary attenuators.

Type 53/54H was introduced in 1958, along with the 533 and 543, renamed Type H in 1959, and dropped after 1970.

Pictures