H: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 2: Line 2:
inputs and has a switch to select between them.  The rise time of the plug-in is 20 nanoseconds; bandwidth is 15MHz.
inputs and has a switch to select between them.  The rise time of the plug-in is 20 nanoseconds; bandwidth is 15MHz.
The sensitivity ranges from 5mV/cm to 20V/cm.  A compromise, Type H is not as fast as Type [[B]], but it is DC-coupled on all ranges.
The sensitivity ranges from 5mV/cm to 20V/cm.  A compromise, Type H is not as fast as Type [[B]], but it is DC-coupled on all ranges.
Type H's use a [[Turret attenuators|turret attenuator]].  
Later Type H's use a [[Turret attenuators|turret attenuator]].  
Type H with S/N less than 10,000 have ordinary attenuator.
Type H with S/N less than 10,000 have ordinary attenuator.



Revision as of 09:35, 30 April 2012

The Tektronix Type H is a single-channel plug-in for 500-series scopes. It provides two inputs and has a switch to select between them. The rise time of the plug-in is 20 nanoseconds; bandwidth is 15MHz. The sensitivity ranges from 5mV/cm to 20V/cm. A compromise, Type H is not as fast as Type B, but it is DC-coupled on all ranges. Later Type H's use a turret attenuator. Type H with S/N less than 10,000 have ordinary attenuator.


Type 53/54H was introduced in 1958, along with the 533 and 543, renamed Type H in 1959, and dropped after 1970.

Manual needed (complete).