View source for Making 1200 series cartridges

TekWiki hosts a large number of [[ROM images]] that come from ROM packs that were used to disassemble and display mnemonics for microprocessors. Theses images can be used to program EPROMs. These EPROMs have to be mounted in a cartridge to be able to load the software. 

==Solution==
Two solutions are available. The first is making a multipurpose RAM/ROM pack, called SuperPack by Pavel Korensky, see design files below.

The second is making a PCB similar to the original one that was used in all the ROM packs, Gerber files are below.

:&rarr; [[Media:Tek1240-SPDesign10.ZIP|Tek1240-SPDesign10.zip note the errata in the readme]]
:&rarr; [[Media:Cartridge.zip|Cartridge.zip 670-8172-00]]

There are two .STL files for making a 3D printed case.
:&rarr; [[Media:Cartridge(4).zip|Cartridge case]]
==Photos==
<gallery>
Cartridge(1).jpg
Cartridge(2).jpg
Cartridge(3).jpg
Cartridge(5).jpg
</gallery>
'''Please note that the files are provided without any guarantee. Use at your own risk!'''

[[Category:Repair issues]]