Mercury switches

From TekWiki
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Mercury switches were used in several Tektronix products for generating pulses with clean edges.

The switches are electromagnetic relays with mercury-wetted contacts inside glass envelopes that contain pressurized gas. The gas prevents arcing of the contacts. In some models, a physically adjustable bias magnet (permanent) is used to "bias" the reed switch in its normally closed position. Mercury switches have limited life.

In pulse generators, the coil of the relay is typically driven by a multivibrator or other periodic current source. Turning off the coil drive waveform when the pulse generator is not in use is recommended.

Tektronix products using mercury switches are:

  • 108 (part# 260-194)
  • 109, 84 / 067-0523-00 (part# 260-0282-02)
  • 110 (part# 260-334)
  • P (part# 050-106 for sn up to 2396, 260-539 after)
  • R (part# 260-250)
  • S (part# 260-308)

Pictures