Difference between revisions of "O"

From TekWiki
Jump to navigation Jump to search
Line 8: Line 8:
 
discontinued=1974 |
 
discontinued=1974 |
 
manuals=
 
manuals=
* [http://w140.com/mmm/tek-o.pdf Tektronix Type O Manual (PDF)]
+
* [[Media:070-323.pdf|Tektronix Type O Manual]] (PDF)
* [http://bama.edebris.com/manuals/tek/o/ Tektronix Type O Manual (DJVU @ BAMA)]
+
** [http://bama.edebris.com/manuals/tek/o/ Alternate (DJVU @ BAMA)]
 
* [http://w140.com/tek_fcp/tek_type_o_factory_cal_proc.pdf Tektronix Type O Factory Calibration Procedure (PDF)]
 
* [http://w140.com/tek_fcp/tek_type_o_factory_cal_proc.pdf Tektronix Type O Factory Calibration Procedure (PDF)]
 
<!-- * [http://w140.com/tek_type-o_1968_catalog.pdf Tektronix Type O in 1968 Catalog (PDF)] -->
 
<!-- * [http://w140.com/tek_type-o_1968_catalog.pdf Tektronix Type O in 1968 Catalog (PDF)] -->

Revision as of 13:31, 27 May 2021

Manuals – Specifications – Links – Pictures

The Tektronix Type O is a letter-series plug-in that contains two op-amps.

The input and feedback networks of the op-amps can be configured from the front panel using knobs and/or user-supplied components. There are sockets on the front panel for banana plugs.

Type O also has a regular signal input that does not involve the op-amps. A mode switch selects which op-amp's output will be displayed, or the regular signal input.

Regular signal bandwidth is 25 MHz, maximum sensitivity is 50 mV/div, op-amp gain-bandwidth product is 15 MHz, and open-loop DC gain is 2500.

Type O was introduced in mid-1962 and was available through 1973.

The Type O can be used with the included 013-0049-01 blank covers, a custom feedback network connected externally or built into a 013-0048-01 adapter box, a 013-081 compensating adapter to increase its bandwidth, a 013-068 Gating Adapter, a 013-0086-00 Leakage Current Adapter, or a 013-0067-00 Logarithmic Amplifier.

Pictures