P6009: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
mNo edit summary
(10 intermediate revisions by 3 users not shown)
Line 1: Line 1:
The P6009 is a 120 MHz, 100× probe for scopes with 1 MΩ input impedance.  Maximum input voltage is 1.5 kV (at DC).
{{Probe Sidebar
 
|manufacturer=Tektronix
It has a contact for readout information (fixed 6.8 kΩ resistor) but no Identify switch.
|model=P6009
 
|summary=120 MHz, 10X, Passive Probe
==Manuals==
|image=Tek p6009 0.jpg
 
|caption=P6009 with readout BNC connector
|for=1 MΩ scope inputs
|introduced=(?)
|discontinued=(?)
|designers=
|manuals=
* [http://w140.com/tek_P6009.pdf Tektronix P6009 Manual (PDF)]
* [http://w140.com/tek_P6009.pdf Tektronix P6009 Manual (PDF)]
* [http://w140.com/tek_p6007_p6009_p6015_cat.pdf Tektronix P6007 P6009 P6015 Catalog Description (PDF)]
* [http://w140.com/tek_p6007_p6009_p6015_cat.pdf Tektronix P6007 P6009 P6015 Catalog Description (PDF)]
* [[Media:Tek p6009 20pf fcp may 1967.pdf|Tektronix P6009 Factory Calibration Procedure]]
}}


==Pictures==
The '''Tektronix P6009''' is a 120 MHz, 100x, passive probe for scopes with 1 MΩ input impedance.


There are two different connector options:
* Part number 010-0170-00 is a P6009 with a 9 foot cable and a plain BNC connector.
* Part number 010-0264-01 is a P6009 with a 9 foot cable and a [[BNC connector with readout ring]]. The extra pin on BNC connector allows the probe's 100x attenuation to be detected. However the P6009 does not have an "Identify" switch.


{{BeginSpecs}}
{{Spec | Attenuation | 100× ±3% with 1 MΩ ±2% scope input }}
{{Spec | Maximum Voltage | 1.5 kV DC + AC peak, derated above 200 kHz }}
{{Spec | Compensation range | 15 - 47 pF }}
{{Spec | Bandwidth | 120 MHz }}
{{Spec | Input capacitance | 2.5 pF }}
{{EndSpecs}}


[[Category:1 MOhm Oscilloscope Probes]]
==Pictures==
[[Category:High Voltage Oscilloscope Probes]]
<gallery>
Tek p6009 0.jpg|P6009 with readout BNC connector
Tek p6009 1.jpg|P6009 with readout BNC connector
Tek p6009 2.jpg|P6009 with readout BNC connector
Tek p6009 3.jpg
Tek p6009 4.jpg|P6009 with readout BNC connector
Tek p6009 5.jpg
Tek p6009 screw-on tip.jpg
Tek p6009 plain bnc.jpg|P6009 with plain BNC connector
Tek p6009 schematic.png|P6009 Schematic
</gallery>


[[Category:Image needed]]
[[Category:1 MΩ Oscilloscope probes]]
[[Category:Specifications needed]]
[[Category:High voltage oscilloscope probes]]

Revision as of 08:53, 8 December 2021

Tektronix P6009
120 MHz, 10X, Passive Probe
P6009 with readout BNC connector

Compatible with 1 MΩ scope inputs

Produced from (?) to (?)

Manuals


Manuals – Specifications – Links – Pictures

The Tektronix P6009 is a 120 MHz, 100x, passive probe for scopes with 1 MΩ input impedance.

There are two different connector options:

  • Part number 010-0170-00 is a P6009 with a 9 foot cable and a plain BNC connector.
  • Part number 010-0264-01 is a P6009 with a 9 foot cable and a BNC connector with readout ring. The extra pin on BNC connector allows the probe's 100x attenuation to be detected. However the P6009 does not have an "Identify" switch.

Key Specifications

Attenuation 100× ±3% with 1 MΩ ±2% scope input
Maximum Voltage 1.5 kV DC + AC peak, derated above 200 kHz
Compensation range 15 - 47 pF
Bandwidth 120 MHz
Input capacitance 2.5 pF

Pictures