Difference between revisions of "P6009"

From TekWiki
Jump to navigation Jump to search
(rename cat)
m
(4 intermediate revisions by 3 users not shown)
Line 1: Line 1:
The '''Tektronix P6009''' is a 120 MHz, 100× probe for scopes with 1 MΩ input impedance. Maximum input voltage is 1.5 kV (at DC).
+
{{Probe Sidebar
 +
|manufacturer=Tektronix
 +
|model=P6009
 +
|summary=120 MHz, 10X, Passive Probe
 +
|image=Tek p6009 0.jpg
 +
|caption=P6009 with readout BNC connector
 +
|for=1 MΩ scope inputs
 +
|introduced=(?)
 +
|discontinued=(?)
 +
|designers=
 +
|manuals=
 +
* [http://w140.com/tek_P6009.pdf Tektronix P6009 Manual (PDF)]
 +
* [http://w140.com/tek_p6007_p6009_p6015_cat.pdf Tektronix P6007 P6009 P6015 Catalog Description (PDF)]
 +
* [[Media:Tek p6009 20pf fcp may 1967.pdf|Tektronix P6009 Factory Calibration Procedure]]
 +
}}
  
It has a contact for [[7000 series readout system|readout information]] (fixed 6.8 kΩ resistor) but no Identify switch.
+
The '''Tektronix P6009''' is a 120 MHz, 100x, passive probe for scopes with 1 MΩ input impedance.
  
==Manuals==
+
There are two different connector options:
 +
* Part number 010-0170-00 is a P6009 with a 9 foot cable and a plain BNC connector.
 +
* Part number 010-0264-01 is a P6009 with a 9 foot cable and a [[BNC connector with readout ring]]. The extra pin on BNC connector allows the probe's 100x attenuation to be detected. However the P6009 does not have an "Identify" switch.
  
* [http://w140.com/tek_P6009.pdf Tektronix P6009 Manual (PDF)]
+
{{BeginSpecs}}
* [http://w140.com/tek_p6007_p6009_p6015_cat.pdf Tektronix P6007 P6009 P6015 Catalog Description (PDF)]
+
{{Spec | Attenuation | 100× ±3% with 1 MΩ ±2% scope input }}
* [[Media:Tek p6009 20pf fcp may 1967.pdf]]
+
{{Spec | Maximum Voltage | 1.5 kV DC + AC peak, derated above 200 kHz }}
 +
{{Spec | Compensation range | 15 - 47 pF }}
 +
{{Spec | Bandwidth | 120 MHz }}
 +
{{Spec | Input capacitance | 2.5 pF }}
 +
{{EndSpecs}}
  
 
==Pictures==
 
==Pictures==
 
 
<gallery>
 
<gallery>
Tek p6009 0.jpg
+
Tek p6009 0.jpg|P6009 with readout BNC connector
Tek p6009 1.jpg
+
Tek p6009 1.jpg|P6009 with readout BNC connector
Tek p6009 2.jpg
+
Tek p6009 2.jpg|P6009 with readout BNC connector
 
Tek p6009 3.jpg
 
Tek p6009 3.jpg
Tek p6009 4.jpg
+
Tek p6009 4.jpg|P6009 with readout BNC connector
 
Tek p6009 5.jpg
 
Tek p6009 5.jpg
 
Tek p6009 screw-on tip.jpg
 
Tek p6009 screw-on tip.jpg
 +
Tek p6009 plain bnc.jpg|P6009 with plain BNC connector
 +
Tek p6009 schematic.png|P6009 Schematic
 
</gallery>
 
</gallery>
  
[[Category:1 MOhm Oscilloscope Probes]]
+
[[Category:1 Oscilloscope probes]]
 
[[Category:High voltage oscilloscope probes]]
 
[[Category:High voltage oscilloscope probes]]
[[Category:Specifications needed]]
 

Revision as of 07:53, 8 December 2021

Tektronix P6009
120 MHz, 10X, Passive Probe
P6009 with readout BNC connector

Compatible with 1 MΩ scope inputs

Produced from (?) to (?)

Manuals


Manuals – Specifications – Links – Pictures

The Tektronix P6009 is a 120 MHz, 100x, passive probe for scopes with 1 MΩ input impedance.

There are two different connector options:

  • Part number 010-0170-00 is a P6009 with a 9 foot cable and a plain BNC connector.
  • Part number 010-0264-01 is a P6009 with a 9 foot cable and a BNC connector with readout ring. The extra pin on BNC connector allows the probe's 100x attenuation to be detected. However the P6009 does not have an "Identify" switch.

Specifications

Attenuation 100× ±3% with 1 MΩ ±2% scope input
Maximum Voltage 1.5 kV DC + AC peak, derated above 200 kHz
Compensation range 15 - 47 pF
Bandwidth 120 MHz
Input capacitance 2.5 pF

Pictures