P6009: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
mNo edit summary |
||
(2 intermediate revisions by 2 users not shown) | |||
Line 1: | Line 1: | ||
{{Probe Sidebar | |||
|manufacturer=Tektronix | |||
|model=P6009 | |||
|summary=120 MHz, 10X, Passive Probe | |||
|image=Tek p6009 0.jpg | |||
|caption=P6009 with readout BNC connector | |||
|for=1 MΩ scope inputs | |||
|introduced=(?) | |||
|discontinued=(?) | |||
|designers= | |||
|manuals= | |||
* [http://w140.com/tek_P6009.pdf Tektronix P6009 Manual (PDF)] | |||
* [http://w140.com/tek_p6007_p6009_p6015_cat.pdf Tektronix P6007 P6009 P6015 Catalog Description (PDF)] | |||
* [[Media:Tek p6009 20pf fcp may 1967.pdf|Tektronix P6009 Factory Calibration Procedure]] | |||
}} | |||
There are different connector options: | The '''Tektronix P6009''' is a 120 MHz, 100x, passive probe for scopes with 1 MΩ input impedance. | ||
There are two different connector options: | |||
* Part number 010-0170-00 is a P6009 with a 9 foot cable and a plain BNC connector. | * Part number 010-0170-00 is a P6009 with a 9 foot cable and a plain BNC connector. | ||
* Part number 010-0264-01 is a P6009 with a 9 foot cable and a [[BNC connector with readout ring]]. The extra pin on BNC connector allows the probe's 100x attenuation to be detected. However the P6009 does not have an "Identify" switch. | * Part number 010-0264-01 is a P6009 with a 9 foot cable and a [[BNC connector with readout ring]]. The extra pin on BNC connector allows the probe's 100x attenuation to be detected. However the P6009 does not have an "Identify" switch. | ||
{{BeginSpecs}} | |||
{{Spec | Attenuation | 100× ±3% with 1 MΩ ±2% scope input }} | |||
{{Spec | Maximum Voltage | 1.5 kV DC + AC peak, derated above 200 kHz }} | |||
{{Spec | Compensation range | 15 - 47 pF }} | |||
{{Spec | Bandwidth | 120 MHz }} | |||
{{Spec | Input capacitance | 2.5 pF }} | |||
{{EndSpecs}} | |||
==Pictures== | ==Pictures== | ||
Line 25: | Line 44: | ||
[[Category:1 MΩ Oscilloscope probes]] | [[Category:1 MΩ Oscilloscope probes]] | ||
[[Category:High voltage oscilloscope probes]] | [[Category:High voltage oscilloscope probes]] | ||
Revision as of 08:53, 8 December 2021
The Tektronix P6009 is a 120 MHz, 100x, passive probe for scopes with 1 MΩ input impedance.
There are two different connector options:
- Part number 010-0170-00 is a P6009 with a 9 foot cable and a plain BNC connector.
- Part number 010-0264-01 is a P6009 with a 9 foot cable and a BNC connector with readout ring. The extra pin on BNC connector allows the probe's 100x attenuation to be detected. However the P6009 does not have an "Identify" switch.
Key Specifications
Attenuation | 100× ±3% with 1 MΩ ±2% scope input |
---|---|
Maximum Voltage | 1.5 kV DC + AC peak, derated above 200 kHz |
Compensation range | 15 - 47 pF |
Bandwidth | 120 MHz |
Input capacitance | 2.5 pF |
Pictures
-
P6009 with readout BNC connector
-
P6009 with readout BNC connector
-
P6009 with readout BNC connector
-
-
P6009 with readout BNC connector
-
-
-
P6009 with plain BNC connector
-
P6009 Schematic