P6009: Difference between revisions

Revision as of 05:16, 9 December 2021

Tektronix P6009
120 MHz, 100×, Passive Probe P6009 with readout BNC connector Compatible with 1 MΩ scope inputs Produced from (?) to (?) Manuals Tektronix P6009 Manual Tektronix P6009 Factory Calibration Procedure Tektronix P6007 P6009 P6015 Catalog Description

The Tektronix P6009 is a 120 MHz, 100x, passive probe for scopes with 1 MΩ input impedance.

There are two different connector options:

Part number 010-0170-00 is a P6009 with a 9 foot cable and a plain BNC connector.
Part number 010-0264-01 is a P6009 with a 9 foot cable and a BNC connector with readout ring. The extra pin on BNC connector allows the probe's 100x attenuation to be detected. However the P6009 does not have an "Identify" switch.

Attenuation	100× ±3% with 1 MΩ ±2% scope input
Maximum Voltage	1.5 kV DC + AC peak, derated above 200 kHz
Compensation range	15 - 47 pF
Bandwidth	120 MHz
Input capacitance	2.5 pF

@@ Line 2: / Line 2: @@
 |manufacturer=Tektronix
 |model=P6009
-|summary=Passive 120 MHz, x10 probe
+|summary=120 MHz, 100×, Passive Probe
 |image=Tek p6009 0.jpg
 |caption=P6009 with readout BNC connector
@@ Line 10: / Line 10: @@
 |designers=
 |manuals=
-* [http://w140.com/tek_P6009.pdf Tektronix P6009 Manual (PDF)]
+* [[Media:070-0401-01.pdf|Tektronix P6009 Manual]]
-* [http://w140.com/tek_p6007_p6009_p6015_cat.pdf Tektronix P6007 P6009 P6015 Catalog Description (PDF)]
 * [[Media:Tek p6009 20pf fcp may 1967.pdf|Tektronix P6009 Factory Calibration Procedure]]
+* [https://w140.com/tek_p6007_p6009_p6015_cat.pdf Tektronix P6007 P6009 P6015 Catalog Description]
 }}
 The '''Tektronix P6009''' is a 120 MHz, 100x, passive probe for scopes with 1 MΩ input impedance.