P6009
The Tektronix P6009 is a 120 MHz, 100x, passive probe for scopes with 1 MΩ input impedance.
There are two different connector options:
- Part number 010-0170-00 is a P6009 with a 9 foot cable and a plain BNC connector.
- Part number 010-0264-01 is a P6009 with a 9 foot cable and a BNC connector with readout ring. The extra pin on BNC connector allows the probe's 100x attenuation to be detected. However the P6009 does not have an "Identify" switch.
Accessories
- 175-0125-00 ground lead 12" (Optional on later versions.)
- 175-0124-00 ground lead 5" (Optional on later versions.)
- 175-0263-00 ground lead 3" (Optional on later versions.)
- 196-3120-01 lead electrical 23AWG, 6.0L, ground (Standard on later versions.)
- 352-0090-00 holder, probe
- 013-0052-00 assy., bayonet
- 214-0325-00 pin, center
- 134-0013-00 plug, banana
- 206-0015-00 tip, straight
- 206-0060-00 tip, probe, spring
- 206-0105-00 tip, probe, hook
- 344-0046-00 clip, probe ground 2 each (Optional on later versions.)
- 013-0071-00 pincher tip
- 070-0401-01/02 manual, instruction
Screw on accessories are 6-32 thread.
Key Specifications
| Attenuation | 100× ±3% with 1 MΩ ±2% scope input |
|---|---|
| Maximum Voltage | 1.5 kV DC + AC peak, derated above 200 kHz |
| Compensation range | 15 - 47 pF |
| Bandwidth | 120 MHz |
| Input capacitance | 2.5 pF |
Pictures
-
P6009 with readout BNC connector
-
P6009 with readout BNC connector
-
P6009 with readout BNC connector
-
-
P6009 with readout BNC connector
-
-
-
P6009 with plain BNC connector
-
P6009 Schematic
-
different readout contact configurations: spring loaded pin (left) vs. spring metal clip with two contact points (right)
