P6045: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
m (Text replacement - "Category:Active Oscilloscope Probes" to "Category:Active oscilloscope probes")
(7 intermediate revisions by the same user not shown)
Line 1: Line 1:
The Tektronix P6045 is a 230MHz FET probe. The signal amplitude range is 500mV.
[[File:p6045 box.jpg|thumb|right|350px]]
The offset can be set to any voltage from -1V to to 1V.  Attenuator heads can be
The '''Tektronix P6045''' is a 230 MHz FET probe.  
 
The signal amplitude range is 500 mV.
 
The offset can be set to any voltage from -1 V to to 1 V.  Attenuator heads can be
placed on the tip of the P6045, reducing the capacitance, increasing the signal
placed on the tip of the P6045, reducing the capacitance, increasing the signal
amplitude range, and of course reducing the sensitivity.
amplitude range, and of course reducing the sensitivity.


The P6045 requires a ±12.5 V supply from a [[015-0073-00]] or a [[454]]/[[454A]] scope.
==Manuals==
* [http://w140.com/TekP6045.pdf Tektronix P6045 Manual (PDF)]
* [http://w140.com/TekP6045.pdf Tektronix P6045 Manual (PDF)]


==Links==
* [http://www.barrytech.com/tektronix/probes/tekp6045.html P6045] @ barrytech.com
==Pictures==
<gallery>
<gallery>
Image:Tek p6045 small.png
Tek p6045 small.png |  schematic diagram
Tek 015-0073-00 output connector.png  | power connector
</gallery>
</gallery>


[[Category:1 MOhm Oscilloscope Probes]]
[[Category:Active oscilloscope probes]]
[[Category:50 Ohm Oscilloscope Probes]]
[[Category:Active Oscilloscope Probes]]

Revision as of 09:36, 2 November 2019

The Tektronix P6045 is a 230 MHz FET probe.

The signal amplitude range is 500 mV.

The offset can be set to any voltage from -1 V to to 1 V. Attenuator heads can be placed on the tip of the P6045, reducing the capacitance, increasing the signal amplitude range, and of course reducing the sensitivity.

The P6045 requires a ±12.5 V supply from a 015-0073-00 or a 454/454A scope.

Manuals

Links

Pictures