P6139: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
(adding accessory set 020-1956-01) |
||
(6 intermediate revisions by 2 users not shown) | |||
Line 1: | Line 1: | ||
[[File:P6139A-full.jpg|thumb|350px|right|P6139A, full view]] | |||
The '''Tektronix P6139''' is a passive 500 MHz ×10 scope probe for 1 MΩ // 8-18 pF scope inputs. | |||
It has a ×10 readout pin, and shares accessories with many other Tektronix [[compact modular probes]]. | |||
{{BeginSpecs}} | |||
{{Spec | Attenuation | 10× }} | |||
{{Spec | Bandwidth | 500 MHz }} | |||
{{Spec | Input impedance | 10 MΩ // 8 pF }} | |||
{{Spec | Length | 1.3 m }} | |||
{{Spec | Intended for | [[TDS500]] series, [[TDS3052]], [[TDS3054]] }} | |||
{{EndSpecs}} | |||
==Issues== | |||
[http://www.eevblog.com/forum/testgear/cheap-tek-500mhz-passive-probes-on-ebay-can-they-be-used-on-any-scope/ According to KE5FX]: | |||
<blockquote> | |||
Unless they've had their cables replaced, they had a whisker- or dendrite-growth problem in the cable that will short out the signal and drive you nuts. It can be cleared by running some current through the BNC connector but only temporarily. The only fix is to order a new cable from Tektronix, which I'm not sure you can still do. | |||
</blockquote> | |||
==Accessories== | |||
* [https://w140.com/tekwiki/wiki/020-1956-01 020-1956-01 Compact Probe Accessory Set] | |||
==Manuals== | |||
* [http://w140.com/tek_p6139a.pdf Tektronix P6139A Manual (PDF)] | * [http://w140.com/tek_p6139a.pdf Tektronix P6139A Manual (PDF)] | ||
==Links== | |||
* [http://www.tek.com/sites/tek.com/files/media/media/resources/60W_15107_2_1.pdf P6131, P6137, P6138A data sheet]] | |||
* [http://www.barrytech.com/tektronix/probes/tekp6137.html P6137 @ barrytech.com] | |||
==Pictures== | |||
<gallery> | <gallery> | ||
File:P6139A-full.jpg|P6139A, full view | |||
File:P6139A-head.jpg|P6139A, close-up of compensation box | |||
</gallery> | </gallery> | ||
[[Category:1 MΩ Oscilloscope probes]] | |||
[[Category:Compact modular probes]] |
Revision as of 07:27, 30 December 2020
The Tektronix P6139 is a passive 500 MHz ×10 scope probe for 1 MΩ // 8-18 pF scope inputs.
It has a ×10 readout pin, and shares accessories with many other Tektronix compact modular probes.
Key Specifications
Attenuation | 10× |
---|---|
Bandwidth | 500 MHz |
Input impedance | 10 MΩ // 8 pF |
Length | 1.3 m |
Intended for | TDS500 series, TDS3052, TDS3054 |
Issues
Unless they've had their cables replaced, they had a whisker- or dendrite-growth problem in the cable that will short out the signal and drive you nuts. It can be cleared by running some current through the BNC connector but only temporarily. The only fix is to order a new cable from Tektronix, which I'm not sure you can still do.
Accessories
Manuals
Links
Pictures
-
P6139A, full view
-
P6139A, close-up of compensation box