P6407: Difference between revisions

Revision as of 17:51, 30 March 2021

The Tektronix P6407 is a 17-bit Word Recognizer Probe for the 2445 Opt. 09, 2465 Opt. 09, 2430A Opt. 03, 2432A Opt. 03 and 2440 Opt. 03 scopes. It connects to the scope through a 6-pin LEMO S-series connector on the rear panel.

The P6407 uses the P64xx-family 10-wire input lead harnesses with 0.2" connectors. It is also possible to use standard jumper wires with pins, sockets or clips on the other end for connecting inputs.

Key Specifications

Input voltage	−0.5 V to 5.5 V Peak max.
Input current	20 μA max. at 2.7 V, 0.6 mA max. at 0.5 V
Speed	Up to 10 MHz without External Clock, 20 MHz with External Clock
Features	17-bit, TTL Compatible

Internals

The scope sends configuration data (compare and don't care bits) through a shift register made from five 74C164s, similar to the P6406. Signal inputs go to 74F00 gates through 300 Ω resistors, 74F521 comparators test the input bits and a 74F02 drives the cable.

Manuals

Links

P6407 @ barrytech.com

Pictures

P6407 probe
Input for P6407 on a 2440 Opt.03

@@ Line 2: / Line 2: @@
 The '''Tektronix P6407''' is a 17-bit Word Recognizer Probe for the [[2445]] Opt. 09,  [[2465]] Opt. 09, [[2430A]] Opt. 03, [[2432A]] Opt. 03 and [[2440]] Opt. 03 scopes. It connects to the scope through a 6-pin [[LEMO S-series connector]] on the rear panel.
-The P6407 uses the [[P64xx input leads|P64xx-family 10-wire input lead harnesses]] with 0.2" connectors.  Is also possible to use standard jumper wires with pins, sockets or clips on the other end for connecting inputs.
+The P6407 uses the [[P64xx input leads|P64xx-family 10-wire input lead harnesses]] with 0.2" connectors.  It is also possible to use standard jumper wires with pins, sockets or clips on the other end for connecting inputs.
 {{BeginSpecs}}