P64xx input leads: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 17: Line 17:
it is also possible to use standard jumper wires with pins, sockets or clips on the other end for connecting inputs.
it is also possible to use standard jumper wires with pins, sockets or clips on the other end for connecting inputs.
==Instructions==
==Instructions==
* [[Media:012-0556-00.pdf |Instructions for diagnostics leads]]
* [[Media:012-0556-00.pdf |(012-0556-00) Instructions for diagnostics leads]]
==Pictures==
==Pictures==
<gallery>
<gallery>

Revision as of 16:51, 10 February 2019

Logic probes from the Tektronix P64xx series share a common 10-lead input connector layout.

These probes include the P6406, P6407, P6408, P6450, P6451, P6452, P6455, P6460, P6462, A6701 and possibly others.

Original input lead sets were

  • 012-0747-00 − standard 10-wire 10 in/25 cm with pluggable probe tips
  • 012-0989-00 − 10-wire 5 in/12 cm with pluggable probe tips
  • 012-0655-01 − ten individual 40 cm leads
  • 012-0655-02 − ten individual 8 cm leads
  • 012-0670-00 − ten individual 16 cm leads
  • 012-0800-00 − 10-wire 10 cm
  • 012-0556-00 − diagnostic leads to connect P6460 to diagnostic test points and test pattern generator outputs of 1240/1241 logic analyzers
  • 103-0209-00 - 2 x ten bundled leads connecting to a standard GPIB connector ,to be used with two probes. Supplied with the DF2

As the the probe-side input connector is a standard .65 mm square pin header on a 0.2" (5.08 mm) pitch, it is also possible to use standard jumper wires with pins, sockets or clips on the other end for connecting inputs.

Instructions

Pictures