Page values for "Pulse Instruments PI-451"
"Products" values
1 row is stored for this page| Manufacturer | Pulse Instruments |
| Model | PI-451 |
| Class | Plug-in |
| Description | MOS/CCD driver |
| Series | TM500 system |
| Introduced | (?) |
| Discontinued | (?) |
"Specifications" values
11 rows are stored for this page| Parameter | Output high level |
| Value | +25 V to –24 V open circuit, or +12.5 V to –12 V into 50 Ω |
| Parameter | Output low level |
| Value | +24 V to –25 V open circuit, or +12 V to –12.5 V into 50 Ω |
| Parameter | Output swing |
| Value | 1 V min. to 30±3 V max. open circuit, or 0.5 V min. to 15±1.5 V max. into 50 Ω |
| Parameter | Output level control |
| Value | manual, voltage programming (1:1, offset ≤80 mV @ ×1 transition time), or (Opt.002) digital |
| Parameter | Transition time |
| Value | 2 ns/V to 2 μs/V @ 25 V and 100 pF load, continuously variable in 3 ranges, independent leading and trailing edge controls |
| Parameter | Trigger input |
| Value | TTL level, 2−5 V into 50 Ω |
| Parameter | Trigger output |
| Value | TTL level, 3 V into 50 Ω, delayed 100 ns from input |
| Parameter | Delay |
| Value | 15 ns or ≤100 ns to ≥100 μs from trigger output, 3 decade ranges + 10:1 variable |
| Parameter | Pulse width |
| Value | same as input, or ≤100 ns to ≥100 μs, 3 decade ranges + 10:1 variable |
| Parameter | Max. frequency |
| Value | 10 MHz @ 20 V, 20 pF down to 4 MHz @ 25 V, 300 pF |
| Parameter | Options |
| Value | Opt. 002 – digitally programmable output voltage levels (12 bit parallel TTL), plus additional TTL clock input and a high level output on the rear interface |