R: Difference between revisions
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
The Tektronix Type R is a plug-in for 500-series oscilloscopes. It is designed to measure risetime of a NPN and PNP transistors, but it works well with FETs as well. It can operate in grounded-emitter or grounded-base configurations. In the grounded-emitter configuration, it provides a variable collector voltage through a collector resistor which is used to sense the collector current. It provides a base bias voltage and a base pulse signal, fed to the base of the transistor through a resistor. The rise time of the base pulse is specified to be less than 5 nanoseconds. Everything can be set independently. The collector signal is AC-coupled to an amplifier whose output is fed to the oscilloscope. The Type R has its own on-board low-voltage, high-current regulated power supplies which feature germanium power transistors. | The Tektronix Type R is a plug-in for 500-series oscilloscopes. It is designed to measure risetime of a NPN and PNP transistors, but it works well with FETs as well. It can operate in grounded-emitter or grounded-base configurations. In the grounded-emitter configuration, it provides a variable collector voltage through a collector resistor which is used to sense the collector current. It provides a base bias voltage and a base pulse signal, fed to the base of the transistor through a resistor. The rise time of the base pulse is specified to be less than 5 nanoseconds. Everything can be set independently. The collector signal is AC-coupled to an amplifier whose output is fed to the oscilloscope. The Type R has its own on-board low-voltage, high-current regulated power supplies which feature germanium power transistors. | ||
* http://bama.edebris.com/manuals/tek/r/ | |||
* http://w140.com/tek_fcp/tek_type_r_factory_cal_proc.pdf | |||
<gallery> | <gallery> | ||
Image:Type_r_with_adapters.jpg | Image:Type_r_with_adapters.jpg | ||
</gallery> | </gallery> | ||
Revision as of 16:34, 28 May 2010
The Tektronix Type R is a plug-in for 500-series oscilloscopes. It is designed to measure risetime of a NPN and PNP transistors, but it works well with FETs as well. It can operate in grounded-emitter or grounded-base configurations. In the grounded-emitter configuration, it provides a variable collector voltage through a collector resistor which is used to sense the collector current. It provides a base bias voltage and a base pulse signal, fed to the base of the transistor through a resistor. The rise time of the base pulse is specified to be less than 5 nanoseconds. Everything can be set independently. The collector signal is AC-coupled to an amplifier whose output is fed to the oscilloscope. The Type R has its own on-board low-voltage, high-current regulated power supplies which feature germanium power transistors.
