R293: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
(16 intermediate revisions by 2 users not shown)
Line 1: Line 1:
The Tektronix R293 is a pulse generator [[introduced in 1968]] for use with automated measurement systems
The '''Tektronix R293''' is a pulse generator [[introduced in 1965]]  
such as the [[240]] and [[R250]].
for use with automated measurement systems such as the [[240]] and [[R250]]. 
The task of designing the R293 was inherited and completed by [[Murlan Kaufman]].


The R293 contains an analog programmable power supply
and an analog programmable pulse generator.
The pulse is produced by an avalanche transistor
fed through a pulse shaper made of diode clamps
and [[snap-off diode|snap-off diodes]]. 
The output pulse amplitude is variable from 6 V to 12 V.
Overshoot of the output pulse is less that 3%, rise and fall time are 1 ns or less.
The service procedure in the manual specifies the use of a [[661]]
for adjustment of the pulse shaper.
Some instances of the R293 have an RF connector on the front panel
while others have all of their connector on the rear panel.
MOD 703M puts all input and output connectors of the R293 on the rear panel,
for use in automated testing systems.
An R293 is normally programmed from an [[R250]].
The power supply output connector mates with a Bendix PC06A-8-4P-SR connector.
* [[Media:12-070-180554-1158107.pdf|Amphenol Miniature Cylindrical Connectors (PDF)]]
==Manuals==
* [http://w140.com/tek_r293.pdf Tektronix R293 Manual (PDF)]
* [http://w140.com/tek_r293_description.pdf Description of R293 from Tektronix Automated Testing Systems book (PDF)]
* [http://w140.com/tek_r293_1968_catalog.pdf Tektronix R293 in 1968 Catalog (PDF)]
==Pictures==
<gallery>
<gallery>
Image:Tek-r293.jpg
Tek-r293.jpg
Tek_r293_frontconn.jpg
<!--Tek r293 top.jpg-->
Tek r293 top2.jpg
Tek r293 top3.jpg
<!--Tek r293 top4.jpg-->
Tek r293 top5.jpg
Tek_r293_block.png|Block Diagram
Tek r293 pulse gen.png|Pulse Generator
Tek r293 pulse shaper.png|Pulse Shaper
Tek r293 prog power supply.png|Programmable Power Supply
Tek r293 pulse gen power supply.png|Pulse Generator Power Supply
</gallery>
</gallery>
[[Category:Introduced in 1965]]
[[Category:Pulse generators]]

Revision as of 15:17, 19 February 2021

The Tektronix R293 is a pulse generator introduced in 1965 for use with automated measurement systems such as the 240 and R250. The task of designing the R293 was inherited and completed by Murlan Kaufman.

The R293 contains an analog programmable power supply and an analog programmable pulse generator. The pulse is produced by an avalanche transistor fed through a pulse shaper made of diode clamps and snap-off diodes.

The output pulse amplitude is variable from 6 V to 12 V. Overshoot of the output pulse is less that 3%, rise and fall time are 1 ns or less.

The service procedure in the manual specifies the use of a 661 for adjustment of the pulse shaper.

Some instances of the R293 have an RF connector on the front panel while others have all of their connector on the rear panel. MOD 703M puts all input and output connectors of the R293 on the rear panel, for use in automated testing systems.

An R293 is normally programmed from an R250.

The power supply output connector mates with a Bendix PC06A-8-4P-SR connector.

Manuals

Pictures