RSA306: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
 
(3 intermediate revisions by 2 users not shown)
Line 1: Line 1:
{{Oscilloscope Sidebar |
{{Instrument Sidebar
title=Tektronix RSA306B |
|class=Spectrum Analyzer
summary=Spectrum Analyzer 9 kHz to 6.2 GHz |
|manufacturer=Tektronix  
image=RSA306B_1.jpg |
|model=RSA306B
caption=Tektronix RSA306B |
|summary=6.2 GHz Spectrum Analyzer
introduced=(?) |
|image=RSA306B_1.jpg
discontinued=(?) |
|caption=Tektronix RSA306B
manuals=
|introduced=(?)
* [[Media: 37W-6037-59_RSA306B_Datasheet.pdf | 37W-6037-59 RSA306B Datasheet (PDF, OCR)]]
|discontinued=(?)
* [[Media: 071-3323-01_RSA306-Installation-and-Safety-Instructions.pdf | 071-3323-01 RSA306 Installation and Safety Instructions (PDF, OCR)]]
|manuals=
* [[Media: 071-3330-02_RSA-Demonstration-Guide.pdf | 071-3330-02 RSA DKIT Self-Guided Demo (PDF, OCR)]]
* [[Media:37W-6037-59_RSA306B_Datasheet.pdf|RSA306B Datasheet]] (OCR)
* [[Media:071-3323-01.pdf|RSA306 Installation and Safety Instructions]] (OCR)
* [[Media:077-1031-04.pdf|RSA600 Series Spectrum Analyzers API Programming Reference]] (OCR)
* [[Media:071-3330-02.pdf|RSA DKIT Self-Guided Demo]] (OCR)
}}
}}
The '''RSA306B''' is a portable spectrum analyzer meant for field or lab use with a frequency range of 9 kHz to 6.2 GHz.  The user interface and display resides on a user-provided PC running [[SignalVu-PC]] software or a user-developed application. The host PC provides all power, control, and data signals over the USB 3.0 cable included with the instrument.  An available SW API is provided to allow you to create your own custom signal processing application.  A self guided demo board and guide can be found here [[RSA-DKIT]].
The '''RSA306B''' is a portable spectrum analyzer meant for field or lab use with a frequency range of 9 kHz to 6.2 GHz.  The user interface and display resides on a user-provided PC running [[SignalVu-PC]] software or a user-developed application. The host PC provides all power, control, and data signals over the USB 3.0 cable included with the instrument.  An available SW API is provided to allow you to create your own custom signal processing application.  A self guided demo board and guide can be found here [[RSA-DKIT]].


Line 67: Line 69:
</gallery>
</gallery>


[[Category: Spectrum Analyzers]]
[[Category:Spectrum analyzers]]

Latest revision as of 02:24, 14 October 2022

Tektronix RSA306B
6.2 GHz Spectrum Analyzer
Tektronix RSA306B

Produced from (?) to (?)

Manuals
Manuals – Specifications – Links – Pictures

The RSA306B is a portable spectrum analyzer meant for field or lab use with a frequency range of 9 kHz to 6.2 GHz. The user interface and display resides on a user-provided PC running SignalVu-PC software or a user-developed application. The host PC provides all power, control, and data signals over the USB 3.0 cable included with the instrument. An available SW API is provided to allow you to create your own custom signal processing application. A self guided demo board and guide can be found here RSA-DKIT.

Signal processing while running SignalVu-PC software provides real-time processing of for general signal analysis, analog modulation analysis, and RF measurements. This software can be programmed through the program’s interface or through the use of the included application programming interface (API). Post processing analysis of large sets of recorded data can be performed across multiple sets using DataVu-PC software.

Front panel inputs/outputs are: RF INPUT N connector (50Ω; +20 dBm ± 40V DC Max); Ref In SMA connector (External frequency reference; 50Ω; 10 Mhz +10 dBm Max) ; Trigger/Sync SMA connector (10k Ω input; 5V TTL 10); USB 3.0 USB connector (USB 3.0 SuperSpeed Micro-B; 5.0 V, ≤ 900 mA (nominal)).

Key Specifications

Frequency Range 9 kHz to 6.2 GHz
RF Input impedance 50 Ω
Maximum Safe Input Power +20 dBm ± 40V DC Max
Measurement (Dynamic) Range -160 dBm to +20 dBm
Fast Sweeps 2 per second over entire 6.2 GHz span
Acquisition (IF) Bandwidth 40 MHz
Real-Time IF Acq Data and Bit Width 112 Ms/s, 14 bits
Minimum Signal Duration for 100% POI 27 µsec
Trigger Threshold Range 0 dB to -50 dB from reference level, for trigger levels > 30 dB above noise floor
Trigger Type Rising or falling edge
Trigger Levels Positive-going: 1.6 V min, 2.1 V max; Negative-going: 1.0 V min, 1.35 V max
Displayed Average Noise −130 dBm/Hz to −149 dBm/Hz
Phase Noise (1 GHz CW at 0 dBm) ≤-89 dBc/Hz to ≤-120 dBc/Hz
Included Accessories Safety/Installation Manual; USB 3.0 locking cable (1 M); SignalVu-PC software, documentation, and USB key
Weight 0.75 kg (1.65 lbs)
Power 5.0 V, ≤ 900 mA (nominal) per USB 3.0 SuperSpeed requirements
Operating Atmospherics Temperatures: -10 °C to +55 °C; Humidity: 5% to 75% from +30 °C to +40 °C; Altitude: Up to 9.144 km (30,000 ft)

Service Options

  • Opt. C3: Calibration Service 3 Years
  • Opt. C5: Calibration Service 5 Years
  • Opt. D1: Calibration Data Report
  • Opt. D3: Calibration Data Report 3 Years (with Opt. C3)
  • Opt. D5: Calibration Data Report 5 Years (with Opt. C5)
  • Opt. R3: Repair Service 3 Years (including warranty)
  • Opt. R5: Repair Service 5 Years (including warranty)

Recommended Accessories

  • Panasonic FZ-G1 Toughpad tablet controller: Recommended for portable field applications (https://na.panasonic.com/us/computers-tablets-handhelds/tablets/tablets/toughpad-fz-g1)
  • RSA300TRANSIT: Hard-side transit case
  • RSA300CASE: Soft carrying case
  • RSA306BRACK: Rackmount for RSA306 or RSA306B, holds 2 units
  • 174-6949-00: USB 2.0 locking cable, 0.5 m (half-length compared to USB cable shipped with the unit)
  • 012-0482-00: Cable, 50 Ω, BNC (m) 3 foot (91 cm)
  • Many more Adapters, Attenuators, 50/75 Ω pads, Antennas, EMC accessories, Filters, Probes, and the RSA-DKIT Demonstration board. Review datasheet for details.

Pictures