Restoring 1220, 1225 and 1230 keypad

From TekWiki
Revision as of 16:49, 9 December 2020 by Raymond (talk | contribs) (→‎Fix)
Jump to navigation Jump to search

Description

(Pic1) "Bouncing" switch, the second trace is the signal coming out of a Schmitt trigger.
(Pic2) Registered presses being sent to the LA.
  • The 1220, 1225 and 1230 have a keypad interface for controlling them. The switches are tactile switches with a small spring. Over time they start to become extremely "bouncy". This is due to a number of factors, some including corrosion and weakening springs. Over time this will lead to problems such as the keypad being less responsive and the analyzer registering multiple presses.

Picture 1 shows what the keypad is registering.

Fix

(Pic3) Keypad switches
(Pic4) Keypad switches
  • WARNING! When taking the analyzer apart, users are at their own risk! The inside contains lethal voltages and precaution must be taken.
  • The switches that the keypad uses are still being manufactured today. They are C&K D6L90F1LFS and the D6L90F2LFS, they are the exact same. The difference being the force required to push the buttons. One takes 1.3 Newtons and the other 2 Newtons (Pic3). The keypad has 26 of them. Replacing them with new ones will fix the excessive bouncing. When de-soldering the switches one has to be careful of burning the PCB and lifting pads because the traces are very small.
→ Datasheet for D6L90F1LFS and D6L90F2LFS

Conclusion

(Pic5) Restored keypad.
  • It is not known how long this fix will last, but it makes the unit usable again. After the replacement the signal is now clean (Pic5).
Retrieved from "https://w140.com/tekwiki/index.php?title=Restoring_1220,_1225_and_1230_keypad&oldid=58133"