S-2: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 10: | Line 10: | ||
* [http://bama.edebris.com/download/tek/s2/s2.djvu Tektronix S-2 Manual (DjVu)] | * [http://bama.edebris.com/download/tek/s2/s2.djvu Tektronix S-2 Manual (DjVu)] | ||
* [http://w140.com/tek_s-2.pdf Tektronix S-2 Manual (PDF)] | * [http://w140.com/tek_s-2.pdf Tektronix S-2 Manual (PDF)] | ||
<gallery> | <gallery> | ||
Image:S2 schem1.png | Image:S2 schem1.png | ||
File:S-52 s-2 rt.jpg | File:S-52 s-2 rt.jpg|[[S-52]] and S-2 give 76ps rise-time together. | ||
File:Tek s2 strobe side.jpg | File:Tek s2 strobe side.jpg | ||
File:Tek s2 amp side.jpg | File:Tek s2 amp side.jpg | ||
File:Tek s2 bridge in place.jpg | File:Tek s2 bridge in place.jpg|Sampling diodes in place. | ||
File:Tek s2 input term r4.jpg | File:Tek s2 input term r4.jpg|Input termination resistor. | ||
File:Tek s2 sampler r.jpg | File:Tek s2 sampler r.jpg | ||
File:Tek s2 sampler l.jpg | File:Tek s2 sampler l.jpg | ||
File:Tek s2 diode removal.jpg | File:Tek s2 diode removal.jpg|Diode holder slides out. | ||
File:Tek s2 amp under.jpg | File:Tek s2 amp under.jpg | ||
File:Tek s2 amp removed.jpg | File:Tek s2 amp removed.jpg | ||
Revision as of 06:05, 30 April 2012
The S-2 plug-in sampling head provides a single GR-874 50-ohm input with a 75ps risetime. The S-2 can be used in the 7000 series and 3S series of sampling plug-ins. The S-2 provides an internal trigger pickoff signal for internal triggering. The noise is specified as less than 10mV.
When the S-2 was first introduced, the rise-time specification was 50ps, but that was not achieved in practice, so the rise-time specification was revised to be 75ps.
-
-
S-52 and S-2 give 76ps rise-time together.
-
-
-
Sampling diodes in place.
-
Input termination resistor.
-
-
-
Diode holder slides out.
-
-
-
-
-
