S-42: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
 
Line 10: Line 10:
|designers=
|designers=
|manuals=
|manuals=
* [[Media:S42.pdf | S-42 manual with schematics]]
* [[Media:070-7191-00.pdf|S-42 Instruction Manual]] (with schematics)
* [[Media:Tek s-42 specifics ordering information.pdf | S-42 Specifications Ordering Information]]
* [[Media:Tek s-42 specifics ordering information.pdf|S-42 Specifications]] (catalog pages)
}}
}}
The '''Tektronix S-42''' is a sampling head for 1300 nm optical signals. It has an [[FC/PC connector|FC/PC fiberoptic connector]] for the input signal. It is essentially an [[S-4]] sampling head with a photodiode at the input.
The '''Tektronix S-42''' is a sampling head for 1300 nm optical signals. It has an [[FC/PC connector|FC/PC fiberoptic connector]] for the input signal. It is essentially an [[S-4]] sampling head with a photodiode at the input.


Specified accuracy is for connections through 8/125 micron single-mode fibre, although a lens in front of the photodiode allows connections using multi-mode fibre as well, at some degradation of response speed.
Specified accuracy is for connections through 8/125 μm single-mode fibre, although a lens in front of the photodiode allows connections using multi-mode fibre as well, at some degradation of response speed.


The manual shows it being used in a [[7S12]]-driven TDR setup with an external [[OT503|OT503 electro-optic converter]] as the optical signal source.
The manual shows it being used in a [[7S12]]-driven TDR setup with an external [[OT503|OT503 electro-optic converter]] as the optical signal source.
{{BeginSpecs}}
{{BeginSpecs}}
{{Spec | Pulse response | 55 ps }}
{{Spec | Pulse response           | 55 ps }}
{{Spec | Bandwidth | 6.4 GHz (equiv.) }}
{{Spec | Bandwidth                 | 6.4 GHz (equiv.) }}
{{Spec | Spectral response | 1000 nm – 1700 nm }}
{{Spec | Spectral response         | 1000 – 1700 nm }}
{{Spec | Deflection | 50 μW/Div to 50 mW/Div @ 1300 nm }}
{{Spec | Deflection               | 50 μW/Div to 50 mW/Div @ 1300 nm }}
{{Spec | Noise equivalent power | 42&nbsp;μW<sub>RMS</sub> max. }}
{{Spec | Noise equivalent power   | 42 μW<sub>RMS</sub> max. }}
{{Spec | Max. nondestructive input | 10&nbsp;mW mean, 125&nbsp;mW peak }}
{{Spec | Max. nondestructive input | 10 mW mean, 125 mW peak }}
{{Spec | Features |  
{{Spec | Features |  
* Mean power meter, dynamic range 5&nbsp;nW to 5&nbsp;mW (60&nbsp;dB), bandwidth 100&nbsp;Hz
* Mean power meter, dynamic range 5 nW to 5 mW (60 dB), bandwidth 100 Hz
}}
}}
{{EndSpecs}}
{{EndSpecs}}
Line 33: Line 33:


The S-42 borrows heavily from the [[S-4]] sampling head, re-using the S-4 strobe, sampler and preamp boards.
The S-42 borrows heavily from the [[S-4]] sampling head, re-using the S-4 strobe, sampler and preamp boards.
It uses the same six-diode traveling-wave sampling gate, strobed by 125&nbsp;ps pulses generated using a [[snap-off diode]] driven by an avalanche transistor.
It uses the same six-diode traveling-wave sampling gate, strobed by 125 ps pulses generated using a [[snap-off diode]] driven by an avalanche transistor.


The S-4's SMA input connector is still present internally, and driven electrically in some of the calibration procedures, with the photodiode removed.
The S-4's SMA input connector is still present internally, and driven electrically in some of the calibration procedures, with the photodiode removed.
Line 47: Line 47:
Tek s-42 d.JPG
Tek s-42 d.JPG
Tek s42.jpg
Tek s42.jpg
Tek s-42 block diag.png|block diagram
Tek s-42 block diag.png   | block diagram
Tek_s-42 schem.png|schematic
Tek_s-42 schem.png         | schematic
s42-spectral-response.jpg | S-42 spectral response
s42-spectral-response.jpg | S-42 spectral response
s42-explosion-diagram.jpg
s42-explosion-diagram.jpg
Tek S-42 1989 catalog.png|Description in [[Tek Catalogs|1989 Catalog]]
Tek S-42 1989 catalog.png | Description in [[Tek Catalogs|1989 Catalog]]
Tek s-42 uncapped.jpg
Tek s-42 uncapped.jpg
</gallery>
</gallery>

Latest revision as of 08:03, 10 March 2022

Tektronix S-42
Optical Sampling Head
S42 Head

Compatible with 7000 and 3S series sampling heads

Produced from 1989 to 1990

Manuals
(All manuals in PDF format unless noted otherwise)
Manuals – Specifications – Links – Pictures

The Tektronix S-42 is a sampling head for 1300 nm optical signals. It has an FC/PC fiberoptic connector for the input signal. It is essentially an S-4 sampling head with a photodiode at the input.

Specified accuracy is for connections through 8/125 μm single-mode fibre, although a lens in front of the photodiode allows connections using multi-mode fibre as well, at some degradation of response speed.

The manual shows it being used in a 7S12-driven TDR setup with an external OT503 electro-optic converter as the optical signal source.

Key Specifications

Pulse response 55 ps
Bandwidth 6.4 GHz (equiv.)
Spectral response 1000 – 1700 nm
Deflection 50 μW/Div to 50 mW/Div @ 1300 nm
Noise equivalent power 42 μWRMS max.
Max. nondestructive input 10 mW mean, 125 mW peak
Features
  • Mean power meter, dynamic range 5 nW to 5 mW (60 dB), bandwidth 100 Hz

Internals

The S-42 borrows heavily from the S-4 sampling head, re-using the S-4 strobe, sampler and preamp boards. It uses the same six-diode traveling-wave sampling gate, strobed by 125 ps pulses generated using a snap-off diode driven by an avalanche transistor.

The S-4's SMA input connector is still present internally, and driven electrically in some of the calibration procedures, with the photodiode removed.

To accommodate the photo diode, the S-42's case is longer than the S-4's. When inserted, the S-42 therefore protrudes from the base unit by about two centimeters.

Pictures