S-5: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
(13 intermediate revisions by 3 users not shown)
Line 1: Line 1:
{{Plugin Sidebar |
{{Plugin Sidebar
title=Tektronix S-5 |
|manufacturer=Tektronix
summary=Sampling Head |
|series=7000 and 3S series sampling heads
image=S5-crop.jpg |
|type=S-5  
caption=S-5 head |
|summary=Sampling Head  
series=[[:Category:Sampling plugins|7000/S3 series Sampling Plugins]] |
|image=Tek s-5 front.jpg  
years=? – ? |
|caption=S-5 head  
manuals=
|introduced=1969
|discontinued=1988
|designers=
|manuals=
* [http://w140.com/tek_s5.pdf Tektronix S-5 Manual (PDF)]
* [http://w140.com/tek_s5.pdf Tektronix S-5 Manual (PDF)]
}}
}}
The S-5 sampling plug-in is the slowest of the S-series samplers.  
The '''Tektronix S-5 Sampling Head''' plug-in is the slowest of the S-series samplers but provides a 1 MΩ input impedance and selectable AC or DC coupling. The [[P6010]] probe was a standard accessory for the S-5.


==Specifications==
Late S-5s route the [[BNC_connector_with_readout_ring|BNC ring contact]] to the "C" contact of the [[S Series plug-in interface]] and allow for proper [[7000_series_readout_system|readout]] scaling in a [[7S11]] or [[7S12]].


* Rise time: 1 ns
{{BeginSpecs}}
* Bandwidth: 350 MHz
{{Spec | Rise time | 1 ns}}
* Input impedance: 1 MΩ || 15 pF (BNC)
{{Spec | Bandwidth | 350 MHz}}
* AC or DC coupling, max 100 VDC, max +/- 1 V signal
{{Spec | Operating input voltage range | 1 V<sub>p-p</sub> (plus up to 100 V DC in AC setting) }}
* Noise: 500 μV
{{Spec | Maximum single sample step | 500 mV}}
{{Spec | Maximum input voltage  | ±100 V<sub>DC</sub> or sine of 100 V<sub>p-p</sub> up to 1 kHz, derated with 6 dB/octave to 5 V<sub>AC</sub> for 20 kHz and up}}
{{Spec | Input impedance | 1 MΩ // 15 pF (BNC)}}
{{Spec | Noise | 500 μV}}
{{Spec | Features| AC or DC coupling}}
{{EndSpecs}}


==Links==
==Links==


* [http://amplifier.cd/Test_Equipment/Tektronix/Tektronix_7000_series_special/S-5.html S-5 page at amplifier.cd]
* [http://amplifier.cd/Test_Equipment/Tektronix/Tektronix_7000_series_special/S-5.html S-5 page @ amplifier.cd]


==Pictures==
==Pictures==
<gallery>
<gallery>
Image:Tek s5 1.jpg
Tek s5 1.jpg
Image:Tek s5 2.jpg
Tek s5 2.jpg
Tek s-5 670-1087-00.jpg
Tek s-5 670-1085-00.jpg
Tek s-5 388-1287-00.jpg
Tek s-5 670-1086-00.jpg
Tek s5 block.png|Block Diagram
Tek s5 schematic.png|Schematic
</gallery>
</gallery>




[[Category:7000 and 3S series sampling heads]]
[[Category:7000 and 3S series sampling heads]]

Revision as of 08:54, 13 August 2021

Tektronix S-5
Sampling Head
S-5 head

Compatible with 7000 and 3S series sampling heads

Produced from 1969 to 1988

Manuals
(All manuals in PDF format unless noted otherwise)
Manuals – Specifications – Links – Pictures

The Tektronix S-5 Sampling Head plug-in is the slowest of the S-series samplers but provides a 1 MΩ input impedance and selectable AC or DC coupling. The P6010 probe was a standard accessory for the S-5.

Late S-5s route the BNC ring contact to the "C" contact of the S Series plug-in interface and allow for proper readout scaling in a 7S11 or 7S12.

Key Specifications

Rise time 1 ns
Bandwidth 350 MHz
Operating input voltage range 1 Vp-p (plus up to 100 V DC in AC setting)
Maximum single sample step 500 mV
Maximum input voltage ±100 VDC or sine of 100 Vp-p up to 1 kHz, derated with 6 dB/octave to 5 VAC for 20 kHz and up
Input impedance 1 MΩ // 15 pF (BNC)
Noise 500 μV
Features AC or DC coupling

Links

Pictures