Difference between revisions of "S-6"

From TekWiki
Jump to navigation Jump to search
(Added link to local copy of instruction manual)
Line 11: Line 11:
 
* [http://w140.com/tek_s6.pdf Tektronix S-6 Manual (low quality, 1987, PDF)]
 
* [http://w140.com/tek_s6.pdf Tektronix S-6 Manual (low quality, 1987, PDF)]
 
* [http://w140.com/TEK_S6_1983.pdf Tektronix S-6 Manual (high quality, 1983, PDF)]
 
* [http://w140.com/TEK_S6_1983.pdf Tektronix S-6 Manual (high quality, 1983, PDF)]
 +
* [[media:070-1128-01.pdf|S-6 Sampling Head Instruction Manual, Revised Aug 1985 (PDF, OCR)]]
 
}}
 
}}
 
The '''Tektronix S-6 Sampling Head''' plug-in is a 50 Ω feed-through unit with a rise-time of 30 ps and bandwidth of 11.5 GHz.
 
The '''Tektronix S-6 Sampling Head''' plug-in is a 50 Ω feed-through unit with a rise-time of 30 ps and bandwidth of 11.5 GHz.

Revision as of 05:55, 3 February 2021

Manuals – Specifications – Links – Pictures

The Tektronix S-6 Sampling Head plug-in is a 50 Ω feed-through unit with a rise-time of 30 ps and bandwidth of 11.5 GHz. It was introduced in 1971.

The S-6 provides two unterminated 50 Ω SMA connections in a loop-through configuration as is convenient for TDR applications. It is good practice to leave a termination resistor on the unit when unused to give some protection against electrostatic discharge.

Specifications

Rise time 30 ps
Bandwidth 11.5 GHz
Operating input voltage range 1 Vp-p
Maximum single sample step 250 mV for less than 5% aberration
Maximum input voltage ±5 VDC
Input impedance 50 Ω (unterminated!)
Noise < 5 mV of noise
Features
  • No internal trigger pick-off signal
  • No internal termination

Links

Pictures

Measurements