SD-20: Difference between revisions
No edit summary |
No edit summary |
||
| Line 23: | Line 23: | ||
{{Spec | Max. input | 1.0 V<sub>p-p</sub> signal, 1.6 V<sub>p-p</sub> (AC+Offset) operating, ±3 V non-destructive }} | {{Spec | Max. input | 1.0 V<sub>p-p</sub> signal, 1.6 V<sub>p-p</sub> (AC+Offset) operating, ±3 V non-destructive }} | ||
{{Spec | Sampling rate | 100 Hz - 200 kHz }} | {{Spec | Sampling rate | 100 Hz - 200 kHz }} | ||
{{Spec | Signal connections | 50 Ω [[SMA connector]]s }} | |||
{{EndSpecs}} | {{EndSpecs}} | ||
Revision as of 04:12, 1 November 2016
The Tektronix SD20 Loopthrough Sampling Head is a single-channel, 20 GHz loop-through sampling head designed for low-loss testing in applications such as microwave systems research and development, digital device characterization and high-speed digital communications circuit design.
The SD20 is nonterminated and keeps losses to a minimum by routing the signal of interest directly through the sampling head without the need of a power divider. The SD20 can also be used for customized TDR measurements of transmission lines and controlled impedance devices. An external signal generator may be used, instead of the SD-24 step generator, to tailor the TDR stimulus to fit a particular situation. For instance, slower slew rates or higher amplitude may be utilized, or you may perform half-sine or impulse testing. In digital communications, the SD20 is useful for viewing and triggering on the clock signal without the use of a power divider.
Key Specifications
| Rise time | 17.5 ps |
|---|---|
| Bandwidth | 20 GHz typ. |
| Noise | typically 750 µVRMS, 1.2 m VRMS max. (350 µV typ./550 µV max. with smoothing) |
| Max. input | 1.0 Vp-p signal, 1.6 Vp-p (AC+Offset) operating, ±3 V non-destructive |
| Sampling rate | 100 Hz - 200 kHz |
| Signal connections | 50 Ω SMA connectors |
