Cargo query

Showing below up to 100 results in range #101 to #200.

Page	Parameter	Value
10A1	Deflection	1 mV/div to 20 V/div, 1−2−5
10A1	Input impedance	1 MΩ // 20 pF
1103	Offset control	+1 to −1 V, course and fine control, 0 V when disabled
1103	Power input	87 to 128 V_AC (low) or 174 to 250 V_AC (high), 48 to 440 Hz, ≤35 W
1103	Power output	+15 V, −15 V, +5 V, −5 V ; ±2% each ; ≤300 mA each
1104	Battery	sealed lead-acid gel type
1104	Charging time	16 h (longer when scope is operating)
1104	DC output	12 V, 8 A
1104	Power	95–128 or 185–250 V_AC
1104	Weight	6.5 kg (14 lb)
111	Output amplitude	≥10 V (selectable polarity) into 50 Ω
111	Pre-trigger	30−250 ns variable with additional calibrated "+1 ns" switch, jitter ≤100 ps
111	Pulse repetition rate	10 Hz to 100 kHz, or by external trigger
111	Rise time	<500 ps
112	Amplification	0.5 to 5000 V/V
112	Bandwidth	DC to 2 MHz @ gain < 166; DC to 1 MHz above
112	Input impedance	1 MΩ // 47 pF
112	Output impedance	8 kΩ
11301	Bandwidth	400 MHz
11301	Sweep	5 ns/Div to 500 ms/Div, 1−2−5, 10 magnifier (same specs for delayed time base)
11301	Trigger modes	DC, AC (>50 Hz), HF Reject (<30 kHz), LF reject (>80 kHz), TV (line or field)
11301	Triggering	0.35 Div (int) or 20 mV (ext) to 50 MHz, increasing to 1 Div/150 mV at max. bandwidth
11301	X-Y operation	X from center plugin, bandwidth 3 MHz X-Y phase difference < 1° to 1 MHz, <3° to 2 MHz
11302	Bandwidth	500 MHz
11302	Features	gated internal counter (500 MHz bandwidth internal and external) internal measurements (RMS, p-p, mean, ...) cursors
11302	Power consumption	240 W max
11302	Sweep	5 ns/Div to 500 ms/Div, 1-2-5, ×10 magnifier (same specs for delayed time base)
11302	Trigger modes	DC, AC (>50 Hz), HF Reject (<30 kHz), LF reject (>80 kHz), TV (line or field)
11302	Triggering	0.35 Div (int) or 20 mV (ext) to 50 MHz, increasing to 1 Div/150 mV at max. bandwidth
11302	Weight	44 pounds (20 kg)
11302	X-Y operation	X from center plugin, bandwidth 3 MHz X-Y phase difference <1° to 1 MHz, <3° to 2 MHz
11402	Bandwidth	1 GHz
11402	CRT	9" monochrome, touch screen
11402	Features	Statistics Advanced Waveform Processing: differentiate, integrate, interpolate, smooth, average, envelope Arithmetic Operators: add, subtract, multiply, divide, square root, log, exponentiate, absolute value, signum Dual Independent Time Bases Menu-based, touch-screen front panel Programmable over GPIB and RS-232 interfaces
11402	Recording length	512 to 10240 points
11402	Sampling rate	up to 20 MS/s
11402	Trigger bandwidth	1 GHz
11402	Vertical resolution	10 bits (14 bits with averaging)
11403	Bandwidth	1 GHz
11403	CRT	8½" color, touch screen
11403	Features	Statistics Advanced Waveform Processing - differentiate, integrate, interpolate, smooth, average, and envelope Arithmetic Operators - add, subtract, multiply, divide, square root, log, absolute value, signum, exponentiate Dual Independent Time Bases Menu-based, touch-screen front panel Programmable over GPIB and RS-232 interfaces
11403	Recording length	512 to 10240 points
11403	Sampling rate	up to 20 MS/s
11403	Trigger bandwidth	1 GHz
11403	Vertical resolution	10 bits (14 bits with averaging)
115	Aberrations	< 3%
115	Amplitude	±100 mV to ±10 V into 50 Ω
115	DC offset	±5 V
115	Delay	50 ns to 500 μs
115	Period	100 ns to 10 ms
115	Rise / Fall time	10 ns to 100 μs
115	Width	50 ns to 500 μs
11801	CRT	Plain 11801: 9" monochrome, touch screen 11801A/B/C: 8½" color, touch screen
11801	Input Sensitivity	2 to 255 mV/div in 1 mV/div steps
11801	Jitter	1.1 ps RMS + 4 ppm of position (typical)
11801	Maximum Trigger Input	1 V_p-p (1x), 10 V_p-p (10x), 2.5 V_p-p prescaler
11801	Record Duration	10 ps to 50 ms
11801	Record Length	512, 1024, 2048, 4096, 5120 samples
11801	Sample Rate	up to 200 kHz
11801	Trigger Sensitivity	50 mV, DC − 4 GHz, AC coupled trigger prescaler to 10 GHz
11801	Vertical Resolution	8 bits − 25 points/div
11802	Deflection	2 to 255 mV/div in 1 mV/div increments; 4 to 510 mV/div in 2 mV/div increments
11802	Record length	512, 1024, 2048, 4096, 5120 samples
11802	Resolution	8 bits full sreen
11802	Sample rate	up to 200 kHz
11802	Time base	1 ps/div to 5 mV/div
11A16	Bandwidth	15 MHz
11A16	Bandwidth	50 MHz
11A16	Deflection	1 mA/Div to 2 A/Div, 1–2–5
11A16	Deflection	5 mA/Div to 10 A/Div, 1–2–5
11A16	Noise	0.3 Div @ 1 mA/Div, 0.2 Div @ 2 mA/Div, 0.1 Div @ 5 mA/Div, 0.05 Div above
11A16	Noise	0.3 Div @ 5 mA/Div, 0.2 Div @ 10 mA/Div, 0.1 Div @ 25 mA/Div, 0.05 Div above
11A32	Bandwidth	DC to 400 MHz; selectable 100 MHz / 20 MHz 4-pole BWL (Bandwidth Limit) filter
11A32	Deflection	1 mV to 10 V per division in 1% calibrated steps
11A32	Features	High-resolution calibrated DC offset Fast overdrive recovery 5 V_RMS overload protection in 50 Ω mode, with manual reset
11A32	Input impedance	50 Ω or 1 MΩ
11A32	Rise time	875 ps in 1 GHz mainframes such as the 11402, 11402A, 11403, 11403A, DSA601A, or DSA602A
11A33	Bandwidth	DC to 150 MHz
11A33	Deflection	1 mV/Div to 10 V/Div calibrated in 1% increments
11A33	Differential DC Offset range	±1 V at 1 mV/Div
11A33	Features	Very high resolution calibrated DC Offset (16,000 Div effective screen height) High common-mode rejection Fast overdrive recovery from large input signals
11A33	Input impedance	50 Ω, 1 MΩ, 1 GΩ selectable
11A34	Bandwidth	DC to 300 MHz. 100 MHz and 20 MHz four pole BWL (Bandwidth Limit) filters may be selected.
11A34	Deflection	1 mV to 10 V/div in 1% calibrated steps
11A34	Features	High-resolution calibrated DC offset Fast overdrive recovery 5 V_RMS input overload protection in 50 Ω mode, with manual reset
11A34	Input impedance	50 Ω or 1 MΩ
11A34	Rise time	1.2 ns in 1 GHz mainframe such as the 11402, 11402A, 11403, 11403A, DSA601A, or DSA602A
11A52	Bandwidth	DC to 600 MHz plus 100 MHz and 20 MHz Bandwidth Limit Filters
11A52	Deflection	1 mV to 10 V per division in 1% calibrated steps
11A52	Features	High-Resolution Calibrated DC Offset Fast Overdrive Recovery Input 5V RMS overload protected with manual reset
11A52	Input impedance	50 Ω
11A52	Rise time	580 ps in 1 GHz mainframe such as the 11402, 11402A. 11403, 11403A, DSA601A, or DSA602A
11A71	Bandwidth	DC to 1 GHz
11A71	Deflection	1 mV/Div to 1 V/Div in 1−2−5 sequence
11A71	Features	Input 5 V_RMS overload protected with manual reset
11A71	Input impedance	50 Ω via a Tekprobe BNC connector on the front on the plug-in
11A71	Number of Inputs	1
11A71	Rise time	350 ps in 1 GHz mainframe such as the 11402, 11402A. 11403, 11403A, DSA601A, or DSA602A
11A72	Bandwidth	1 GHz
11A72	Input impedance	50 Ω via a Tekprobe BNC connector on the front on the plug-in

Modify query

View wikitext

{{#cargo_query:
limit=100
|offset=100
|tables=Specifications
|fields=_pageName=Page,Parameter=Parameter,Value=Value
|max display chars=300
}}

Table(s):
Field(s):
Where:
Join on:
Group by:
Having:
Order by:
Limit:
Offset:
Format:

Cargo query

Navigation menu