Cargo query

1 mV/div to 20 V/div, 1−2−5

1 MΩ // 20 pF

+1 to −1 V, course and fine control, 0 V when disabled

87 to 128 V_AC (low) or 174 to 250 V_AC (high), 48 to 440 Hz, ≤35 W

+15 V, −15 V, +5 V, −5 V ; ±2% each ; ≤300 mA each

sealed lead-acid gel type

16 h (longer when scope is operating)

12 V, 8 A

95–128 or 185–250 V_AC

6.5 kg (14 lb)

≥10 V (selectable polarity) into 50 Ω

30−250 ns variable with additional calibrated "+1 ns" switch, jitter ≤100 ps

10 Hz to 100 kHz, or by external trigger

<500 ps

0.5 to 5000 V/V

DC to 2 MHz @ gain < 166; DC to 1 MHz above

1 MΩ // 47 pF

8 kΩ

400 MHz

5 ns/Div to 500 ms/Div, 1−2−5, 10 magnifier
(same specs for delayed time base)

DC, AC (>50 Hz), HF Reject (<30 kHz), LF reject (>80 kHz), TV (line or field)

0.35 Div (int) or 20 mV (ext) to 50 MHz, increasing to 1 Div/150 mV at max. bandwidth

X from center plugin, bandwidth 3 MHz
X-Y phase difference < 1° to 1 MHz, <3° to 2 MHz

500 MHz

• gated internal counter (500 MHz bandwidth internal and external)
• internal measurements (RMS, p-p, mean, ...)
• cursors

240 W max

5 ns/Div to 500 ms/Div, 1-2-5, ×10 magnifier
(same specs for delayed time base)

DC, AC (>50 Hz), HF Reject (<30 kHz), LF reject (>80 kHz), TV (line or field)

0.35 Div (int) or 20 mV (ext) to 50 MHz, increasing to 1 Div/150 mV at max. bandwidth

44 pounds (20 kg)

X from center plugin, bandwidth 3 MHz
X-Y phase difference <1° to 1 MHz, <3° to 2 MHz

1 GHz

9" monochrome, touch screen

512 to 10240 points

up to 20 MS/s

1 GHz

10 bits (14 bits with averaging)

1 GHz

8½" color, touch screen

512 to 10240 points

up to 20 MS/s

1 GHz

10 bits (14 bits with averaging)

< 3%

±100 mV to ±10 V into 50 Ω

±5 V

50 ns to 500 μs

100 ns to 10 ms

10 ns to 100 μs

50 ns to 500 μs

• Plain 11801: 9" monochrome, touch screen
• 11801A/B/C: 8½" color, touch screen

2 to 255 mV/div in 1 mV/div steps

1.1 ps RMS + 4 ppm of position (typical)

1 V_p-p (1x), 10 V_p-p (10x), 2.5 V_p-p prescaler

10 ps to 50 ms

512, 1024, 2048, 4096, 5120 samples

up to 200 kHz

50 mV, DC − 4 GHz, AC coupled trigger prescaler to 10 GHz

8 bits − 25 points/div

2 to 255 mV/div in 1 mV/div increments; 4 to 510 mV/div in 2 mV/div increments

512, 1024, 2048, 4096, 5120 samples

8 bits full sreen

up to 200 kHz

1 ps/div to 5 mV/div

15 MHz

50 MHz

1 mA/Div to 2 A/Div, 1–2–5

5 mA/Div to 10 A/Div, 1–2–5

0.3 Div @ 1 mA/Div, 0.2 Div @ 2 mA/Div, 0.1 Div @ 5 mA/Div, 0.05 Div above

0.3 Div @ 5 mA/Div, 0.2 Div @ 10 mA/Div, 0.1 Div @ 25 mA/Div, 0.05 Div above

DC to 400 MHz; selectable 100 MHz / 20 MHz 4-pole BWL (Bandwidth Limit) filter

1 mV to 10 V per division in 1% calibrated steps

• High-resolution calibrated DC offset
• Fast overdrive recovery
• 5 V_RMS overload protection in 50 Ω mode, with manual reset

50 Ω or 1 MΩ

875 ps in 1 GHz mainframes such as the 11402, 11402A, 11403, 11403A, DSA601A, or DSA602A

DC to 150 MHz

1 mV/Div to 10 V/Div calibrated in 1% increments

±1 V at 1 mV/Div

• Very high resolution calibrated DC Offset (16,000 Div effective screen height)
• High common-mode rejection
• Fast overdrive recovery from large input signals

50 Ω, 1 MΩ, 1 GΩ selectable

DC to 300 MHz. 100 MHz and 20 MHz four pole BWL (Bandwidth Limit) filters may be selected.

1 mV to 10 V/div in 1% calibrated steps

• High-resolution calibrated DC offset
• Fast overdrive recovery
• 5 V_RMS input overload protection in 50 Ω mode, with manual reset

50 Ω or 1 MΩ

1.2 ns in 1 GHz mainframe such as the 11402, 11402A, 11403, 11403A, DSA601A, or DSA602A

DC to 600 MHz plus 100 MHz and 20 MHz Bandwidth Limit Filters

1 mV to 10 V per division in 1% calibrated steps

• High-Resolution Calibrated DC Offset
• Fast Overdrive Recovery
• Input 5V RMS overload protected with manual reset

50 Ω

580 ps in 1 GHz mainframe such as the 11402, 11402A. 11403, 11403A, DSA601A, or DSA602A

DC to 1 GHz

1 mV/Div to 1 V/Div in 1−2−5 sequence

• Input 5 V_RMS overload protected with manual reset

50 Ω via a Tekprobe BNC connector on the front on the plug-in

1

350 ps in 1 GHz mainframe such as the 11402, 11402A. 11403, 11403A, DSA601A, or DSA602A

1 GHz

50 Ω via a Tekprobe BNC connector on the front on the plug-in

DC to 3 GHz (in 11403A/CSA404 only)

10 mV/div to 1 V/div

50 Ω

< 130 ps

13 x 10 cm

• Composite output
• RS-232 (optional)
• Printer port

32 channels

90-250 V

either P6442, P6443 or P6444 (16-channel)

8.2 kg (18 lb.)

13 cm × 10 cm

• Composite output
• RS-232 (optional)
• Printer port

48 channels

90-250 V

either P6442, P6443 or P6444 (16-channel)

8.6 kg (19 lb.)

3 Hz to 25 kHz

10 MΩ

0.1 V_p-p

≤7.5 μV_RMS, input-referred

31 kΩ

One 1.345 V mercury battery (RM3R) and one miniature 30 V battery (413); 100 hours runtime

 ×100 (40 dB)

13 x 10 cm

• Composite output
• RS-232 (optional)
• GPIB (optional)
• Printer port (optional)

16 to 64 channels

90-250 V

either P6442, P6443 or P6444 (16-channel)

8.6 kg / 19 lb (1230B: 12.2 kg / 29 lb)

3% FS, 1% FS with "careful" calibration using S-30 Delta Standard

UHF connector (DUT) + 4 mm jack (guard)

250 Ω source impedance, can drive 200 pF

<1 V for capacitors, <0.25 V for inductors, 120-140 kHz

3, 10, 30, 100 or 300 pF / 3, 10, 30, 100 or 300 μH full scale

32 ns typ.

50 Hz

0.1 mA_p-p

20 ns (eq. 17 MHz −3 dB bandwidth)

1 mA/Div to 1 A/Div, 1−2−5 (scope input fixed at 50 mV/Div)

10 Hz to 30 MHz in P6019/P6021 x120 mode

8 Hz to 54 MHz in P6020/P6022 x50 mode

1 mA/Div to 1 A/Div, 1−2−5 (scope at 50 mV/Div)

125 in P6019/P6021 switch position

50 in P6020/P6022 switch position

300 MHz (−3dB, one switch)

50 Ω

600 Ω

15 V DC

600 Ω

15 V DC

600 Ω

15 V DC

600 Ω

15 V DC

600 Ω

15 V DC

1325 Ω

24 V DC

600 Ω

15 V DC

600 Ω

15 V DC

600 Ω

15 V DC

130 Ω

4 V DC

65 Ω

5 V DC

154-0718-00 (NTSC-ruled), 154-0718-01 (CCIR-ruled), 154-0718-05 (blank, Opt.3)

75 Ω nominal (AUX Video input)

2.5 pF @ VCB 4 V

1 GHz @ VCE 14 V, IC 160 mA

3 W @ VCE 30 V, Tj < 200°C

80 MHz

5 mV

3300 typ.

20 mA

±5 to ±15 V

80 MHz

5 mV

3300 typ.

5 mA

±5 to ±15 V

DC, regulated, 15 mA max

DC, regulated, 5 mA max

DC, regulated, 125 mA max

DC, regulated, 175 mA max

DC, unregulated, 170 mA max

DC, unregulated, 250 mA max

DC, unregulated max load?

AC, unregulated, 10 A max

AC, unregulated, 20 A max

DC, regulated, 125 mA max

80 mm × 100 mm (3" × 4") CRT, P31 (Opt. 74: White Phosphor)

L-Band: 950 MHz to 1.8 GHz; 70 MHz band: 45 MHz to 100 MHz

L-Band: Full, 10 MHz/div, 1 MHz/div, and 10 kHz/div; 70 MHz: Full, 1 MHz/div, and 100 kHz/div

L-Band: –30 dBm; 70 MHz: –20 dBm

–80 dBm

90 − 250 V_AC, 48 to 66 Hz, 35 W

–6 dB bandwidth selections 300 kHz / 10 kHz

No built-in internal attenuation. Apply an external attenuator to keep the maximum safe input power below the rating listed above

75 Ω

20 ms to 200 ms, variable

Reduces Video Bandwidth to ≈ 10 kHz

Standard accessories: 3.8 kg (8.5 lbs)

Kings Winchester KC-59-570-M06 (Tek Part# 131-0297-01)

??

50cm

Cambion 460-3308-01-03-00

• 15 V / 200 A
• 75 V / 40 A
• 350V / 8 A

10 μs

20 A

1000 W, 100 W, and 10 W

300 μs, 80 μs

80 μs

Within 3% of on-screen value

0.1 μA/division to 20 A/division in 1-2-5 sequence

50 MHz @ 50 mV/Div and up (in fast mainframes), 28 MHz @ 5 mV/Div, 15 MHz with cascaded channels (~0.5 mV/Div)

5 mV/Div to 20 V/Div, 1−2−5

1 MΩ // 15 pF

600 V DC + peak AC

Ch 1, Ch 2, ALT, CHOP, ADD

7 ns @ 50 mV/Div and up (in fast mainframes), 13 ns @ 5 mV/Div, 24 ns with cascaded channels (~0.5 mV/Div)

1 MΩ // 20 pF

10 mV/div

600 V combined DC and peak AC

DC to 50 MHz

7 ns

50 Ω

50 MHz down to 5 mV/div, 40 MHz at 1 mV/div

20,000:1 from DC to 100 kHz, 10,000:1 up to 1 MHz, 200:1 at 20 MHz

1 mV/div to 20 V/div, 1−2−5

2 MHz, AC coupling 2 Hz

10000:1, DC to 100 kHz, 1mV/Div to 50mV/Div

1 mV/Div to 50 V/Div in 1–2–5 sequence

1 MΩ // 33 pF (either input)

500 kHz, LF limit switchable DC, 0.1 Hz to 10 kHz in ×10 steps, HF limit switchable 100 Hz to 100 kHz in ×3/×10 steps, and 500 kHz; AC coupling 1.6 Hz

10 μV/Div to 10 V/Div in 1–2–5 sequence

1 MΩ // 47 pF (either input)

1 MHz, LF limit switchable DC, 0.1 Hz to 10 kHz in ×10 steps, HF limit switchable 100 Hz to 1 MHz in ×3/×10 steps, AC coupling 1.6 Hz

10 μV/Div to 10 V/Div in 1–2–5 sequence

1 MΩ // 47 pF (either input)

15 kHz to 60 MHz, magnifier usable to 2.5 kHz

log, lin, square, video

10 MHz to 4 GHz

1 kHz to 100 kHz, variable

−110 to −90 dBm

15 kHz to 60 MHz, magnifier usable to 2.5 kHz

log, lin, square, video

925 MHz to 10.4 GHz

1 kHz to 100 kHz, variable

–105 to –75 dBm

20 pF

575 mV

20 ± 1 mA

min. 8.0

100 mV

0.6 nH

2.5 Ω

max. 100 °C

300 mV

< 10 pF (typ. 5 pF)

1 mA +/- 10%

65 mV

< 0.18 mA (typ. 0.12 mA)

350 mV

< 5 pF (typ. 3.5 pF)

3.2 GHz

8.5 mS ±1 mS

1 mA ±2.5%

65 mV

max. 4 Ω

< 0.14 mA (typ. 0.095 mA)

355 mV

< 25 pF (typ. 10 pF)

2.2 mA ±10%

65 mV

< 0.48 mA (typ. 0.29 mA)

350 mV

< 10 pF (typ. 7 pF)

2.2 mA ±2.5%

65 mV

< 0.6 mA (typ. 0.45 mA)

355 mV

< 50 pF (typ. 25 pF)

4.7 mA ±10%

65 mV

< 1.04 mA (typ. 0.6 mA)

350 mV

< 25 pF (typ. 13 pF)

4.7 mA ±2.5%

65 mV

< 0.6 mA (typ. 0.45 mA)

355 mV

< 90 pF (typ. 50 pF)

10 mA ±10%

65 mV

< 2.2 mA (typ. 1.3 mA)

350 mV

< 50 pF (typ. 27 pF)

10 mA ±2.5%

65 mV

< 1.4 mA (typ. 0.95 mA)

355 mV

< 150 pF (typ. 90 pF)

22 mA ±10%

65 mV

< 4.8 mA (typ. 2.9 mA)

350 mV

< 100 pF (typ. 55 pF)

190 mS

22 mA ±2.5%

65 mV

1.2 ns

780 MHz

1 Ω max.

< 3.1 mA (typ. 2.1 mA)

355 mV

DC to 500 kHz (100 kHz at 1 mV/div)

10 rechargeable NiCd cells

3-5 Hours with maximum intensity

154-0642-00 (<B080000) or 154-0699-00, 6(V) × 10(H)

(H/W/D) 3" × 5.2" × 8.9" (7.6 cm x 13.2 cm x 22.6 cm)

1 MΩ // 130 pF

max. 600 V DC + peak AC, or 600 V_p-p AC

110-126V _AC ±10%, 58−62 Hz

< 2 W @ 126 V_AC, 60 Hz

200 ms to 5 μs per division

3 lbs/1.38 kg

500 kHz (reduced to 400/300/100 kHz in 5/2/1 mV/Div ranges)

6 × 10 divisions of 0.203" (5.16 mm), 154-0699-00 tube, P31 phosphor, 1 kV acceleration

1 mV/Div to 50 V/Div, 1-2-5, and variable (up to 125 V/Div), or X-Y (X via Ch1)

1 MΩ // 140 pF (160 pF below 100 mV/Div)

10 internal size A NiCd cells, 3-5 hour operation, or AC line, < 3 W

500 ms/Div to 5 μS/Div, 1-2-5, and variable magnifier 1-5 ×

0.2 Div internal, 1 V external (banana jack input)

DC – 200 kHz (5 µA/Div – 10 μA/Div); DC – 400 kHz (20 μA/Div – 200 mA/Div)

DC – 1 MHz (at 10 mV/Div and below, 400 kHz)

2 × “D” NiCd cells

16 h

0.1 mA: 1000 Ω; 1 mA: 100 Ω; 10 mA: 10.2 Ω; 100 mA: 1.2 Ω; 1000 mA: 0.3 Ω

5 µA/Div to 100 mA/Div, ±3%

0.1 to 1000 mA
Accuracy: 0.1 mA: ±0.5%, ±3 counts; 1 mA – 1000 mA: ±0.25%, ±3 counts

0.1 V to 1000 V, Input Resistance: 10 MΩ
Accuracy, 0.1 V & 1 V: ±0.1%, ±3 counts; 10 V & 100 V: ±0.15%, ±1 count; 1000 V: ±0.2%, ±1 count

10 MΩ // 150 pF (5 mV/Div – 1 V/Div), 100 pF (2 V/Div to – 100 V/Div)

90 – 136 V_AC. 48 – 62 Hz (Option 1: 180 – 250 V_DC. or 180 – 250 V_AC, 48 – 62 Hz)

3.5 hours typical at maximum intensity after full charge cycle

Less than 8 watts

1 KΩ: ±0.5%, ±3 counts; 10 KΩ – 1 MΩ: ±0.5%, ±1 count; 10 MΩ: ±1%, ±1 count

875 ns (5 mV/Div – 10 mV/Div); 350 ns (20 mV/Div – 100 V/Div)

500 ms/Div – 2 µs/Div, ±5% (magnified or unmagnified)

DC Volts

5 mV/Div to – 100 V/Div, ±3%

110 V to 126 V only, max. 3 W

500 kHz above 10 mV/Div ; 400 kHz @ 5 mV/Div, 200 kHz @ 2 mV/Div, 100 kHz @ 1 mV/Div

10 × A size NiCd, 2.5–3.5 hours in store mode, 3.5–5 hours in non-store mode, 8 hours to charge (instrument off)

154-0695-00 (SN -49999), 154-0732-00 (SN 50000+)

1 mV/Div to 50 V/Div, 1–2–5 sequence

1 MΩ (integral probes)

> 80 Div/ms (500 Div/ms in Automatic Enhance)

20 MHz (analog)

8 cm × 10 cm, 12.5 kV acceleration

5 mV/Div to 5 V/Div, 1-2-5, ±3%

• Readout
• Cursors
• TV and P-P auto trigger
• X-Y operation (2 MHz X BW), ±3° from DC to 50 kHz
• One trace reference memory
• RS-232 interface (option 12) with hardcopy function (HPGL, Epson FX)

1 MΩ // 25 pF

95−128 V_AC / 185−250 V_AC, 48−440 Hz, 70 W

Two P6103 ×10, 2 m Probes

2K per channel

vertical 8 bit, horizontal 11 bit

17.5 ns

10 MS/s, both channels simultaneously (two ADCs)

138 mm (w) × 380 mm (h) × 438 mm (d), 7.6 kg

50 ns/Div to 0.5 s/Div,  ×10 magnifier (5 ns/Div)

20 μs/Div to 0.5 s/Div,  ×100 store to 50 s/Div

20 MHz

1.8 kV cathode voltage, no post-deflection acceleration

max. 40 W

6.2 kg (13.7 lb)

DC to 5 MHz

154-0705-00, 6 Div (V) × 10 Div (H), 1 kV acceleration

(H/W/D) 3" × 5.25" × 9" (7.6 cm × 13.2 cm × 22.8 cm)

1 MΩ // 29 pF

max. 600 V DC + Peak AC, or 600 V_p-p AC

10 rechargeable NiCd cells

90-250 V_AC @ 48−62 Hz, or 80-250 V_DC

2-3 hours

5 W @ 250 V

200 ms to 1 μs, 17 steps

3.5 lb (1.5 kg)

50 MHz (analog) / 10 MHz (digital)

5 mV/Div to 5 V/Div, 500 μV/Div magnification feature

50 MHz (analog)

5 mV/Div – 5 V/Div, 1–2–5; ×10 vertical mag. to 500 μV/Div (BW limited)

1 MΩ // 25 pF

4 kSamples per channel

(selected)

• 07 – Internal DC Inverter (for 11.8–30 V_DC supply)
• 30 – Opt.07 + 1104 battery (2 hours runtime)

20 MS/s

Realtime: 50 ns/Div – 0.5 s/Div, ×10/×50 Mag. to 5 ns/Div (non store mode); Store Mode: 20 μs/Div – 50 s/Div

60 MHz (non-storage), 10 MHz (storage)

2 mV/Div to 10 V/Div (2 mV/Div bandwidth limited to 10 MHz)

• On-screen readout and cursors
• X-Y store and non-store operation
• Store front-panel setup in nonvolatile memory

1 MΩ // 20 pF

Parallel printer port (DB25), RS232C (optional), GPIB (optional)

4 k samples per channel (Opt. 1M: 128k), can store two waveforms

• 10: GPIB interface
• 12: RS-232 Interface
• 1M: memory expansion to 128k samples per channel

85 W max.

8 bits

20 MS/s max.

50 MHz at 2 mV/Div to 10 mV/Div, 60 MHz at 20 mV/Div and above; (2213A switchable 10 MHz limit

2 mV/Div to 10 V/Div, 1−2−5, ±3%

7 ns at 2 mV/Div to 10 mV/Div, 5.8 ns at 20 mV/Div and above

20 MHz

5 mV/Div – 5 V/Div in 1–2–5 sequence, 0.5 mV/Div bandwidth limited to 1 MHz

1 MΩ // 25 pF

RS232C (printer/plotter/PC)

16 kSamples

(selected)

• 07 – Internal DC Inverter (for 11.8–30 V_DC supply)
• 30 – Opt.07 + 1104 battery

85 W max.

16 MS/s

0.1 μs/Div – 0.5 s/Div (non store mode) / 2 μs/Div – 50 s/Div (store mode)

7.9 kg (14.7 lbs)

DC to >60 MHz, 20 mV/Div to 10 V/Div, 0 °C to +40 °C; >50 MHz in 2 mV/Div to 10 mV/Div ranges or from +40 °C to +50 °C

At least 10:1 at 10 MHz

display area : 80 × 100 mm²

2 mV/div to 10 V/div, 1-2-5

With feet and handle: 137 x 361 x 511 mm³

max. 400 V (DC+peak AC) or 800 V_p-p AC to 1 kHz or less; impedance 1 MΩ ±2% // 30 ±3 pF

• X-Y operation
• Probe adjust (0.5V at 1kHz)

1 MΩ ±2% // 30 ±3 pF

400 V (DC + peak AC) or 800 V_p-p AC to 1 kHz or less

< 5.8 ns (calculated)

50 ns/Div to 500 ms/Div, 1-2-5,  ×10 magnifier, i.e. down to 5 ns/Div

Auto, Norm, TV Field

0.4 Div internal / 50 mV external up to 2 MHz; 1.5 Div internal / 250 mV external up to 60 MHz; AC coupled ≥10 Hz

6.1 kg; 7.6 kg with front panel cover, accessories and pouch

input (intensity); DC to 5 MHz

60 MHz (analog)

1 mV/Div to 10 V/Div

• On-screen readout and cursors
• X-Y store and non-store operation
• Store front-panel setup in nonvolatile memory

Parallel printer port (DB25), RS232C (optional), GPIB (optional)

16K samples per channel (Opt. 1M: 128K), can store 16 waveforms

• 10: GPIB interface
• 12: RS-232 Interface
• 1M: memory expansion to 128k samples per channel

8 bits

20 MS/s max.

Single-shot: 1 MHz, repetitive signals: 10 MHz

5 mV/Div to 50 V/Div (222PS: 50 mV/Div to 500 V/Div)

±400 V DC or peak AC, each channel (222PS: ±850 V or 600 V_AC)

512 samples

8 bit

10 MS/s

50 ns/Div to 20 s/Div

60 MHz (50 MHz in 2 mV/Div range), 10 MHz limit switchable

8 x 10 cm, P31 phosphor, 14 kV acceleration

2 mV/Div to 5 V/Div, 1-2-5

• Reference waveform memory
• TV line and field trigger
• Variable holdoff

> 100 ns

4 K samples single channel, 2 K per channel in ALT or CHOP

analog X/Y plotter output, 500 mV/Div, pen lift relay contact

90-250 V, 85 W, fan-cooled

8 bits

5.8 ns (7 ns in 2 mV/Div range)

20 MS/s single channel, 10 MS/s in ALT or CHOP

8.2 kg (18 lb.)

100 MHz (80 MHz in 2 mV/Div range), 20 MHz limit switchable

60 MHz (50 MHz in 2 mV/Div range), 10 MHz limit switchable

8 x 10 cm, P31 phosphor, 14 kV acceleration

2 mV/Div to 5 V/Div, 1-2-5

• Reference waveform memory
• Cursors and readout
• Signal averaging
• TV line and field trigger
• Variable holdoff

> 100 ns

4 K samples single channel, 2 K per channel in ALT or CHOP

• Opt.10 – GPIB (board 671-0304-00)
• Opt.12 – RS232 (board 671-0303-00)

analog X/Y plotter output, 500 mV/Div, pen lift relay contact

90-250 V, 85 W, fan-cooled

8 bits

3.5 ns (4.4 ns in 2 mV/Div range)

5.8 ns (7 ns in 2 mV/Div range)

100 MS/s single channel, 50 MS/s in ALT or CHOP

20 MS/s single channel, 10 MS/s in ALT or CHOP

8.2 kg (18 lb.)

≥50 MHz (≥5 MHz with ×10 vertical magnification)

154-0907-00 tube, 80 × 100 mm² display, P31 phosphor, 12.6 kV acceleration

5 mV/Div to 5 V/Div, 1–2–5; 500 μV/Div with ×10 vertical magnification; variable ≥2.5:1

• X-Y mode (± 3° from DC to 150 kHz)
• Calibrator (0.5 V ±5% into 1 MΩ Load; 1 kHz ±20%)

1 MΩ // 25±2 pF

400 V (DC + peak AC) or 800 V_p-p AC to ≤10 kHz

(selected)

• 1R – Rackmount kit
• 02 − Front Cover and Pouch
• 07 – Internal DC Inverter (for 11.8–30 V_DC supply)
• 30 – Opt.07 + 1104 battery
• 18 – P6122 probes instead of standard P6103

95–128 or 185–250 V_AC, 48–440 Hz, ≤70 W (80 VA)

≤7 ns (≤70 ns with ×10 vertical magnification)

0.5 s/Div to 50 ns/Div, 1−2−5; ×10 Mag. down to 5 ns/Div; variable ≥2.5 : 1

0.3 Div or 40 mV @ 5 MHz, 1 Div or 200 mV @ 5 MHz

5 V causes noticeable modulation (positive decreases intensity), DC to 5 MHz; max. 400 V (DC + peak AC) or 800 V_p-p AC to ≤10 kHz

100 MHz (analog)

At least 10:1 at 10 MHz

154-0861-00; display area : 8 × 10 cm²

2 mV/div to 5 V/div, 1−2−5

With feet and handle: 137 x 361 x 511 mm³