Cargo query

Jump to navigation Jump to search

Showing below up to 100 results in range #101 to #200.

View (previous 100 | next 100) (20 | 50 | 100 | 250 | 500)

Page Parameter Value
11403 CRT

8½" color, touch screen

11403 Features
  • Statistics
  • Advanced Waveform Processing - Differentiate, integrate, interpolate, smooth, average, and envelope
  • Arithmetic Operators - Plus, minus, multiply, divide, square root, log, absolute value, signum, exp.
  • Dual Independent Time Bases
  • Menu-based, touch-screen front panel
  • Programmable over GPIB and RS-232 interfaces
11403 Recording length

512 to 10240 points

11403 Sampling rate

up to 20 MS/s

11403 Trigger bandwidth

1 GHz

11403 Vertical resolution

10 bits (14 bits with averaging)

115 Aberrations

< 3%

115 Amplitude

±100 mV to ±10 V into 50 Ω

115 DC offset

±5 V

115 Delay

50 ns to 500 μs

115 Period

100 ns to 10 ms

115 Rise / Fall time

10 ns to 100 μs

115 Width

50 ns to 500 μs

11801 CRT
  • Plain 11801: 9" monochrome, touch screen
  • 11801A/B/C: 8½" color, touch screen
11801 Input Sensitivity

2 to 255 mV/div in 1 mV/div steps

11801 Jitter

1.1 ps RMS + 4 ppm of position (typical)

11801 Maximum Trigger Input

1 Vp-p (1x), 10 Vp-p (10x), 2.5 Vp-p prescaler

11801 Record Duration

10 ps to 50 ms

11801 Record Length

512, 1024, 2048, 4096, 5120 samples

11801 Sample Rate

up to 200 kHz

11801 Trigger Sensitivity

50 mV, DC − 4 GHz, AC coupled trigger prescaler to 10 GHz

11801 Vertical Resolution

8 bits − 25 points/div

11802 Deflection

2 to 255 mV/div in 1 mV/div increments; 4 to 510 mV/div in 2 mV/div increments

11802 Record length

512, 1024, 2048, 4096, 5120 samples

11802 Resolution

8 bits full sreen

11802 Sample rate

up to 200 kHz

11802 Time base

1 ps/div to 5 mV/div

11A16 Bandwidth

15 MHz

11A16 Bandwidth

50 MHz

11A16 Deflection

1 mA/Div to 2 A/Div, 1-2-5

11A16 Deflection

5 mA/Div to 10 A/Div, 1-2-5

11A16 Noise

0.3 Div @ 1 mA/Div, 0.2 Div @ 2 mA/Div, 0.1 Div @ 5 mA/Div, 0.05 Div above

11A16 Noise

0.3 Div @ 5 mA/Div, 0.2 Div @ 10 mA/Div, 0.1 Div @ 25 mA/Div, 0.05 Div above

11A32 Bandwidth

DC to 400 MHz plus 100 MHz and 20 MHz BWL filters

11A32 Deflection

1 mV to 10V per division in 1% calibrated steps

11A32 Features
  • High-Resolution Calibrated DC Offset
  • Fast Overdrive Recovery
  • 50 Ω mode 5V RMS overload protected with manual reset
11A32 Input impedance

50 Ω or 1 MΩ

11A32 Number of Inputs

2

11A32 Rise time

875 ps in 1 GHz mainframe such as the 11402, 11402A, 11403, 11403A, DSA601A, or DSA602A

11A33 Bandwidth

DC to 150 MHz

11A33 Deflection

1 mV/Div to 10 V/Div calibrated in 1% increments

11A33 Differential DC Offset range

±1 V at 1 mV/Div

11A33 Features
  • Very high resolution calibrated DC Offset (16,000 Div effective screen height)
  • High common-mode rejection
  • Fast overdrive recovery from large input signals
11A33 Input impedance

50 Ω, 1 MΩ, 1 GΩ selectable

11A34 Bandwidth

DC to 300 MHz plus 100 MHz and 20 MHz BWL filters

11A34 Deflection

1 mV to 10V per division in 1% calibrated steps

11A34 Features
  • High-Resolution Calibrated DC Offset
  • Fast Overdrive Recovery
  • 50 Ω mode 5 V RMS overload protected with manual reset
11A34 Input impedance

50 Ω or 1 MΩ

11A34 Number of Inputs

4

11A34 Rise time

1.2 ns in 1 GHz mainframe such as the 11402, 11402A. 11403, 11403A, DSA601A, or DSA602A

11A52 Bandwidth

DC to 600 MHz plus 100 MHz and 20 MHz BWL filters

11A52 Deflection

1 mV to 10V per division in 1% calibrated steps

11A52 Features
  • High-Resolution Calibrated DC Offset
  • Fast Overdrive Recovery
  • Input 5V RMS overload protected with manual reset
11A52 Input impedance

50 Ω

11A52 Number of Inputs

2

11A52 Rise time

580 ps in 1 GHz mainframe such as the 11402, 11402A. 11403, 11403A, DSA601A, or DSA602A

11A71 Bandwidth

DC to 1 GHz

11A71 Deflection

1 mV/Div to 1 V/Div in 1−2−5 sequence

11A71 Features
  • Input 5 VRMS overload protected with manual reset
11A71 Input impedance

50 Ω via a Tekprobe BNC connector on the front on the plug-in

11A71 Number of Inputs

1

11A71 Rise time

350 ps in 1 GHz mainframe such as the 11402, 11402A. 11403, 11403A, DSA601A, or DSA602A

11A72 Bandwidth

1 GHz

11A72 Input impedance

50 Ω via a Tekprobe BNC connector on the front on the plug-in

11A81 Bandwidth

DC to 3 GHz (in 11403A/CSA404 only)

11A81 Deflection

10 mV to 1V per division

11A81 Input impedance

50 Ω

11A81 Rise time

< 130 ps

1220 CRT

13 x 10 cm

1220 Features
  • Composite output
  • RS-232 (optional)
  • Printer port
1220 Number of channels

32 channels

1220 Power

90-250 V

1220 Probes

either P6442, P6443 or P6444 (16-channel)

1220 Weight

8.2 kg (18 lb.)

1225 CRT

13 cm × 10 cm

1225 Features
  • Composite output
  • RS-232 (optional)
  • Printer port
1225 Number of channels

48 channels

1225 Power

90-250 V

1225 Probes

either P6442, P6443 or P6444 (16-channel)

1225 Weight

8.6 kg (19 lb.)

1230 CRT

13 x 10 cm

1230 Features
  • Composite output
  • RS-232 (optional)
  • GPIB (optional)
  • Printer port (optional)
1230 Number of channels

64 - 16 channels

1230 Power

90-250 V

1230 Probes

either P6442, P6443 or P6444 (16-channel)

1230 Weight

8.6 kg (19 lb.) (1230)

12.2 kg (29 lb.) (1230B)

130 Accuracy

3% FS, 1% FS with "careful" calibration using S-30 Delta Standard

130 DUT connection

UHF connector (DUT) + 4 mm jack (guard)

130 Guard output

250 Ω source impedance, can drive 200 pF

130 Measurement voltage

<1 V for capacitors, <0.25 V for inductors, 120-140 kHz

130 Ranges

3, 10, 30, 100 or 300 pF / 3, 10, 30, 100 or 300 μH full scale

131 Delay time

32 ns typ.

131 Lower frequency limit

50 Hz

131 Noise

0.1 mAp-p

131 Rise time

20 ns (eq. 17 MHz -3 dB)

131 Sensitivity

1 mA/Div to 1 A/Div, 1-2-5 (scope input fixed at 50 mV/Div)

134 Bandwidth

8 Hz to 54 MHz @ gain 50, 10 Hz to 30 MHz @ gain 125

134 Current range

1 mA/Div to 1 A/Div, 1−2−5 (scope at 50 mV/Div)

134 Gain

50 or 125 (selectable)

1360 Frequency

300 MHz (−3dB, one switch)

View (previous 100 | next 100) (20 | 50 | 100 | 250 | 500)

Modify query

View wikitext
{{#cargo_query:
tables=Specifications
|fields=_pageName=Page,Parameter=Parameter,Value=Value
|order by=`_pageName` , `Parameter` , `Value` 
|offset=100
|limit=100
|max display chars=300
}}