TDS1012: Difference between revisions

Revision as of 23:12, 24 May 2019

The Tektronix TDS1012 is a dual-channel, 100 MHz, 1 GS/s digital scope with a monochrome LCD screen. An External trigger input, along with a CompactFlash card slot on front, and the rear mounted optional TDS2CMA Communication Module provides Centronics printer port, RS-232, and GPIB rear ports for convenient interconnectivity.

Easy access to the MATH MENU button provides waveform adjustments (CH1-CH2, CH2-CH1, CH1+CH2) along with FFT (spectrum, harmonics, distortion, noise, impulse, vibration) measurements. Measurements can also be performed for time (frequency) and voltage (amplitude). Repetitive signals can be captured and averaged to remove noise, or captured as a single-shot signal.

Triggering of signal capturing is available through a comprehensive TRIG MENU providing Edge (rising or falling), Video (NTSC, PAL, SECAM), and Pulse Width (or Glitch) triggering on CH1, CH2, Ext and AC Line sources.

{{{manufacturer}}}

Digital Storage 100 MHz 2-channel scope

Produced from 2005 to ?

Manuals

TDS1000 and TDS2000 Series user manual (1.2 MB, PDF, OCR)
071-1064-00 TDS1000 and TDS2000-Series User Manual Revision A (10.32 MB PDF)
071-1076-02 TDS1000 and TDS2000-Series Service Manual (8.032 MB PDF)
077-0444-01 TDS1000, & TDS2000-Series Programmer Manual (15.25 MB PDF)
TDS1000 and TDS2000 Series Oscilloscopes Datasheet (666 KB PDF)
TDS1000 AND TDS2000 Series Firmware Update Notice (786 B TXT)

(All manuals in PDF format unless noted otherwise)

Manuals – Specifications – Links – Pictures

Key Specifications

Bandwidth and Channels	100 MHz; Bandwidth is 20 MHz at 2 mV/div; 2 Channels
Sample Rate	1.0 GS/s on each channel
Record Length	2.5 K points
Automatic Waveform Measurements	Period, Frequency, +Width, -Width, Rise Time, Fall Time, Max, Min, Peak-to-Peak, Mean, Cycle RMS
Waveform Processing	Operators (Add, Subtract, FFT); FFT (Windows: Hanning, Flat Top, Rectangular; 2048 sample points; Autoset Menu (Single-button, automatic setup of all channels for vertical, horizontal, and trigger systems with undo autoset)
Autoset Menu	Square Wave (Single-cycle, Multi-cycle, Rising or Falling Edge); Sine Wave (Single-cycle, Multi-cycle, FFT Spectrum); Video (NTSC, PAL, SECAM) Field: All, Odd or Even Line:All or Selective Line Number

Pictures

@@ Line 1: / Line 1: @@
-The '''Tektronix TDS1012''' is a dual-channel, 100 MHz, 1 GS/s digital scope with a monochrome LCD screen.
+The '''Tektronix TDS1012''' is a dual-channel, 100 MHz, 1 GS/s digital scope with a monochrome LCD screen.  An External trigger input, along with a CompactFlash card slot on front, and the rear mounted optional TDS2CMA Communication Module provides Centronics printer port, RS-232, and GPIB rear ports for convenient interconnectivity.
+Easy access to the MATH MENU button provides waveform adjustments (CH1-CH2, CH2-CH1, CH1+CH2) along with FFT (spectrum, harmonics, distortion, noise, impulse, vibration) measurements.  Measurements can also be performed for time (frequency) and voltage (amplitude).  Repetitive signals can be captured and averaged to remove noise, or captured as a single-shot signal.
+Triggering of signal capturing is available through a comprehensive TRIG MENU providing Edge (rising or falling), Video (NTSC, PAL, SECAM), and Pulse Width (or Glitch) triggering on CH1, CH2, Ext and AC Line sources.
 {{Oscilloscope Sidebar |
@@ Line 18: / Line 22: @@
 {{BeginSpecs}}
-{{Spec | Display (1/4 VGA LCD) | Mono }}
+{{Spec | Bandwidth and Channels| 100 MHz; Bandwidth is 20 MHz at 2 mV/div; 2 Channels }}
-{{Spec | Bandwidth | 100 MHz; Bandwidth is 20 MHz at 2 mV/div }}
+{{Spec | Sample Rate| 1.0 GS/s on each channel }}
-{{Spec | Channels| 2 }}
-{{Spec | Ext Trigger Input| Present }}
-{{Spec | Sample Rate on each channel| 1.0 GS/s }}
 {{Spec | Record Length| 2.5 K points }}
-{{Spec | Vertical Resolution| 8-bits }}
-{{Spec | Vertical Sensitivity| 2 mV to 5 V/div with calibrated fine adjustment }}
-{{Spec | DC Vertical Accuracy| ±3% }}
-{{Spec | Vertical  Zoom| Vertical expand or compress a live or stopped waveform }}
-{{Spec | Max Imput Voltage| 300 VRMS CAT II; derated at 20 dB/decade above 100 kHz to 13 Vp-p AC at 3 MHz and above }}
-{{Spec | Position Range| 2 mV to 200 mV/div ±2 V; >200 mV to 5 V/div  ±50 V }}
-{{Spec | BW Limit| 20 MHz }}
-{{Spec | Input Coupling| AC, DC, GND }}
-{{Spec | Input Impedance| 1 MΩ in parallel with 20 pF }}
-{{Spec | Time Base Range| 5 ns to 50 s/div }}
-{{Spec | Time Base Accuracy| 50 ppm }}
-{{Spec | Horizontal  Zoom| Horizontal expand or compress a live or stopped waveform }}
-{{Spec | Acquisition Modes| Peak Detect, Sample, Average, Single Sequence }
-{{Spec | Trigger Types| Edge (rising or falling), Video (NTSC, PAL, SECAM), Pulse Width (or Glitch) }}
-{{Spec | Trigger Modes| Auto, Normal, Single Sequence }}
-{{Spec | Trigger Source| CH1, CH2, Ext, Ext/5, AC Line }}
-{{Spec | Trigger View| Displays trigger signal while trigger view button is depressed }}
-{{Spec | Trigger Signal Frequency Readout| Provides a frequency readout of the trigger source }}
-{{Spec | Cursors| Time, Voltage, Measurements: [Δ]T, 1/[Δ]T (frequency), [Δ]V }}
 {{Spec | Automatic Waveform Measurements| Period, Frequency, +Width, -Width, Rise Time, Fall Time, Max, Min, Peak-to-Peak, Mean, Cycle RMS }}
 {{Spec | Waveform Processing| Operators (Add, Subtract, FFT); FFT (Windows: Hanning, Flat Top, Rectangular; 2048 sample points; Autoset Menu (Single-button, automatic setup of all channels for vertical, horizontal, and trigger systems with undo autoset) }}
 {{Spec | Autoset Menu| Square Wave (Single-cycle, Multi-cycle, Rising or Falling Edge); Sine Wave (Single-cycle, Multi-cycle, FFT Spectrum); Video (NTSC, PAL, SECAM) Field: All, Odd or Even  Line:All or Selective Line Number }}
-{{Spec | Interface| Centronics type parallel, RS-232, GPIB, Compact Flash Memory }}
-{{Spec | Probes| Two [[P2220]] 200 MHz ×10 to x1 probes [[BNC connector]] }}
 {{EndSpecs}}
 ==Pictures==

TDS1012: Difference between revisions

Revision as of 23:12, 24 May 2019

Key Specifications

Pictures

Navigation menu