TDS680

Tektronix TDS680

1 GHz, 5 GS/s digital scope

Produced from (?) to (?)

Manuals

Common

TDS680B

TDS680C

(All manuals in PDF format unless noted otherwise)

Manuals – Specifications – Links – Pictures

The Tektronix TDS680 is a 1 GHz, 5 GS/s 2-channel digital storage scope with a monochrome screen.
Two plus Two channel operation allows up to two of the four channels to be displayed simultaneously.
Channels not displayed can be used to couple a triggering signal to the oscilloscope.

Key Specifications

Bandwidth	1 GHz at 10 mv/div and above; 750 MHz @ 5 mV/div; 600 MHz @ 2 mV/div; 500 MHz @ 1 mV/div
Sample rate	1 or 2 channels @ 5 GS/s
Number of Channels	2 + 2
Vertical Sensitivity	1 mV to 10 V/div with calibrated fine adjustment
Resolution	8 bit
Time Base Range	200 ps to 10 s/div
Record length	15k samples per channel
Acquisition modes	sample, envelope, average, high-resolution, peak-detect
Display	Monochrome
Trigger modes	Edge, logic, pulse; Video trigger with option 05 (NTSC, SECAM, PAL, HDTV, and FlexFormat)
Storage	1.44 Mbyte, 3.5 inch, DOS 3.3-or-later floppy disk. NVRAM storage for saving waveforms, hardcopies, and setups. Units with option HD present (requires additional hardware) have a hard disk drive
I/O	Full GPIB programmability
Hardcopy	Using GPIB, RS-232, or Centronics ports