Page values for "TDS714L"
Jump to navigation
Jump to search
"Products" values
1 row is stored for this page| Manufacturer | Tektronix |
| Model | TDS714L |
| Class | Oscilloscope |
| Description | 4-ch 500 MHz, 500 MS/s digital scope |
| Series | TDS series scopes |
| Introduced | 1995? |
| Discontinued | 1998? |
"Specifications" values
14 rows are stored for this page| Parameter | Bandwidth |
| Value | 500 MHz |
| Parameter | Sample rate |
| Value | 1 or 2 channels @ 500 MS/s |
| Parameter | Number of Channels |
| Value | 4 |
| Parameter | Vertical Sensitivity |
| Value | 1 mV to 10 V/div with calibrated fine adjustment |
| Parameter | Resolution |
| Value | 8 bit |
| Parameter | Time Base Range |
| Value | 500 ps to 10 s/div |
| Parameter | Record length |
| Value | 250K samples on 1 or two channels, 130K on 3 or 4 channels |
| Parameter | Record Length (2M Option only) |
| Value | 8 M points on 1 channel; 4 M points on 2 channels ; 2 M points on 3 or 4 channels |
| Parameter | Acquisition modes |
| Value | sample, envelope, average, high-resolution, peak-detect |
| Parameter | Display |
| Value | Color; Zoom |
| Parameter | Trigger modes |
| Value | Edge, logic, pulse; Video trigger with option 05 (NTSC, SECAM, PAL, HDTV, and FlexFormat) |
| Parameter | Storage |
| Value | 1.44 Mbyte, 3.5 inch, DOS 3.3-or-later floppy disk. NVRAM storage for saving waveforms, hardcopies, and setups. Units with option HD present (requires additional hardware) have a hard disk drive |
| Parameter | I/O |
| Value | Full GPIB programmability |
| Parameter | Hardcopy |
| Value | Using GPIB, RS-232, or Centronics ports, also compatible with Zip 100/250 disk drives |