File:154-0698-00(2).jpg
Original file (1,280 × 983 pixels, file size: 269 KB, MIME type: image/jpeg)
The deflection system according to the "Y" represents two delay lines based on long inductors with square turns. One side of each of these coils is a distributed deflecting plate.
Of course, the plate of "Y", connected at both ends, as it should be in the high-frequency deflection system. One end of each plate is connected to the signal source, the other end is connected to the housing through a matching load.
I must say that in Russia (where I come from) traditionally it is customary to call the "helical" design of the deflecting system was called the "traveling wave", unlike simply "distributed plates", combined in a delay line by separately wound chokes (such as 154-0230-00 CRT, applied in Tek 585). Accordingly, the CRT with the helical distirbured deflection plates was called the "Traveling Wave CRT".
File history
Click on a date/time to view the file as it appeared at that time.
Date/Time | Thumbnail | Dimensions | User | Comment | |
---|---|---|---|---|---|
current | 16:36, 25 June 2017 | 1,280 × 983 (269 KB) | Vladimir (talk | contribs) |
You cannot overwrite this file.
File usage
The following page uses this file: