P6041: Difference between revisions

P6041 (view source)

239 bytes added , 31 October 2021

no edit summary

39,160

edits

@@ Line 1: / Line 1: @@
-[[File:CT-2.jpg|thumb|400px|right]]
+{{Probe Sidebar
+|manufacturer=Tektronix
+|model=P6041
+|summary=AC current probe
+|for=50 Ω scope inputs
+|image=CT-2.jpg
+|caption=P6041 with CT-2 current transformer
+|introduced=(?)
+|discontinued=(?)
+|designers=Murlan Kaufman
+|manuals=
+* [http://w140.com/tek_ct1_and_ct2.pdf Tektronix CT-1 and CT-2 Manual (PDF)]
+* [http://w140.com/tek_p6041_ct-2_1971_cat.pdf Description of P6041 and CT-2 in 1971 Catalog (PDF)]
+}}
 The '''Tektronix P6041''' is an AC current probe for oscilloscopes.
-The '''CT-2''' is the current transformer part of the probe.
+The '''CT-2''' is the current transformer part of the probe.  It was designed by [[Murlan Kaufman]].
-It was designed by [[Murlan Kaufman]].
 Multiple CT-2 units can be left installed in a circuit and only one connected using the P6041 cable.
-==Specifications==
+{{BeginSpecs}}
-* Sensitivity: 1 mV/mA into a 50 Ω load
+{{Spec | Bandwidth | "30% down at 1.2 kHz, 7% down at 200 MHz" }}
-* Frequency Response: "30% down at 1.2 kHz, 7% down at 200 MHz"
+{{Spec | Sensitivity | 1 mV/mA into a 50 Ω load }}
-* Max. current: 2.5 A RMS, 100 A peak
+{{Spec | Current range | max. 2.5 A RMS, 100 A peak }}
+{{EndSpecs}}
-* [http://w140.com/tek_ct1_and_ct2.pdf Tektronix CT-1 and CT-2 Manual (PDF)]
-* [http://w140.com/tek_p6041_ct-2_1971_cat.pdf Description of P6041 and CT-2 in 1971 Catalog (PDF)]
 [[Category:Oscilloscope current probes]]