Page values for "RSA3303"

Jump to navigation Jump to search

"_pageData" values

1 row is stored for this page
FieldField typeValue
_creationDateDatetime2019-08-08 1:31:49 AM
_modificationDateDatetime2022-10-14 8:48:47 AM
_categoriesList of String, delimiter: |Introduced in (?) Spectrum analyzers
_isRedirectBooleanNo
_pageIDInteger21,769
_pageNamePageRSA3303
_pageTitleString

RSA3303

_pageNamespaceInteger0

"Products" values

1 row is stored for this page
FieldField typeValue
ManufacturerPageTektronix
ModelStringRSA3303B
ClassStringSpectrum Analyzer
DescriptionWikitext string

3 GHz Spectrum Analyzer

SeriesPage
IntroducedText(?)
DesignersList of Page, delimiter: ;
DiscontinuedText(?)

"Specifications" values

21 rows are stored for this page
FieldField typeValue
ParameterStringFrequency Range
ValueWikitext

DC to 3 GHz

FieldField typeValue
ParameterStringMax Capture BW
ValueWikitext

15 MHz

FieldField typeValue
ParameterStringRF Input impedance
ValueWikitext

50 Ω

FieldField typeValue
ParameterStringMaximum Safe RF Input Power
ValueWikitext

+30 dBm ±0.2 V (RF Band) ±5 V (Baseband) ±5 V (IQ input), RF Attn ≥10 dB

FieldField typeValue
ParameterStringInput RF/Baseband Attenuator
ValueWikitext

0 dB to 50 dB (2 dB step at <3.5 GHz, 10 dB step at ≥3.5 GHz)

FieldField typeValue
ParameterStringInput IQ Input Attenuator
ValueWikitext

0 dB to 30 dB (10 dB step)

FieldField typeValue
ParameterStringDynamic Range (Spurious Free)
ValueWikitext

–70 dBc/15 MHz

FieldField typeValue
ParameterStringReference Level Range
ValueWikitext

–50 dBm to +30 dBm (1 dB step) (RF); –30 dBm to +20 dBm (5 dB step) (Baseband); –10 dBm to +20 dBm (5 dB step) (IQ Inputs)

FieldField typeValue
ParameterStringResolution Bandwidth per Span (1 Hz to 10 MHz)
ValueWikitext

Span > 2 GHz: 100 kHz min; to Span 100 Hz: 1 Hz min

FieldField typeValue
ParameterStringIQ Inputs (Opt 03)
ValueWikitext

20 MHz BW Differential

FieldField typeValue
ParameterStringMinimum Signal Duration for 100% POI
ValueWikitext

≤41 µsec

FieldField typeValue
ParameterStringTrigger Types
ValueWikitext

Level, Free run, External, and Freq. Mask Trigger (Opt. 02)

FieldField typeValue
ParameterStringExt Trigger Threshold Levels
ValueWikitext

–1.5 to +1.5 V settable

FieldField typeValue
ParameterStringDisplayed Average Noise at 1 GHz
ValueWikitext

–150 dBm/Hz (Preamp off)

FieldField typeValue
ParameterStringPhase Noise at offsets from 1 GHz
ValueWikitext

10 kHz: –108 dBc/Hz, 1 MHz: –133 dBc/Hz, 10 MHz: –136 dBc/Hz

FieldField typeValue
ParameterStringDisplay
ValueWikitext

8.4 inch color TFT

FieldField typeValue
ParameterStringStorage
ValueWikitext

20 GB hard drive and diskette drive (either a 3.5-inch 2HD (1.44 MB) or 2DD (720 KB)

FieldField typeValue
ParameterStringWeight (all options)
ValueWikitext

20 kg (44 lbs)

FieldField typeValue
ParameterStringPower & Dissipation (fully loaded)
ValueWikitext

90–250 V, 47–63 Hz, 350 W max; the principal power switch in at the lower left corner of the rear panel, while the front panel power switch allows ON or STANDBY modes

FieldField typeValue
ParameterStringOperating environment
ValueWikitext

+10 °C to +40 °C, 20% to 80% rH (no condensation); Altitude ≤3000 m (9842 ft)

FieldField typeValue
ParameterStringConnections
ValueWikitext

Front panel inputs/outputs are: RF IN N connector (50Ω, +30 dBm max); PreAmp Pwr LEMO S-series connector (Preamp power connector) .

Rear panel inputs/outputs: REF OUT/IN BNC connectors (50Ω); I+/I- INPUT BNC connectors (50Ω, when using one connector as a single-ended input terminate the other end in 50Ω, Opt. 03 only); Q+/Q- INPUT BNC connectors (50Ω, when using one connector as a single-ended input terminate the other end in 50Ω, Opt. 03 only); TRIG OUT/IN BNC connectors (50Ω); GPIB connector (IEEE 488.2); and US Power Plug (115 V nominal).

Side panel inputs/outputs: LAN Ethernet connector (10/100BASE-T), VGA Connector, and 2 X USB connectors (USB 1.1).