View table: Specifications

> 25 dB

50 kHz to 3 MHz - usable from 10 kHz to 20 MHz

0.25 dB

• 124 Ω
• 135 Ω
• None

×2 (delayed output)

75±1 ns

50 Ω

175 ps

attenuated ×5, 600 ps rise time

±1%

≥ ±20 V, ±5 mA

approx. 250 Ω

< 35  μs

Within 0.25% into 1 MΩ load

0.2 mV to 100 V in 1−2−5 sequence, 5 mA in current loop

100 V

DC+, DC-, Squarewave

1 kHz within 20%

Within 0.25% into 1 MΩ load

0.2 mV to 100 V in 1-2-5 sequence, 5mA in current loop

100 V

DC+, DC-, Squarewave

1 kHz within 20%

3 MHz ±2%, 65−300 MHz ±2%, 300−500 MHz ±5%

0.5 V_p-p to 4 V_p-p into 50 Ω in 0.5 V_p-p increments; variable between calibrated steps; max. output 4.2 V_p-p

±2% of indicated frequency; 3 MHz output ±5%

65 MHz to 500 MHz

50 Ω ±1%, via GR-874 connector

500 MHz (067-0587-01) / 250 MHz (067-0587-00)

300 ps

2 to 10 Div

± 3% from 3 MHz to 1 GHz

50 Ω

0.5 to 1 V_p-p

Top at least ±5 Div from center of screen

0.5 V into 50 Ω, 55 to 95 ns lead time (internally variable)

10 Hz to 1 MHz in decade steps, 0.1 %

< 150 ps

± 0.3% in ± 3 Div, ± 0.5% in ± 4 Div, Linearity ± 0.2% of 10 Div

2 to 10 Div

± 3% from 3 MHz to 1 GHz

50 Ω

0.5 to 1 V_p-p

Top at least ±5 Div from center of screen

0.5 V into 50 Ω, 55 to 95 ns lead time (internally variable)

10 Hz to 1 MHz in decade steps, 0.1 %

< 150 ps

± 0.3% in ± 3 Div, ± 0.5% in ± 4 Div, Linearity ± 0.2% of 10 Div

Into floating 2 MΩ load or differential oscilloscope with 1 MΩ inputs

10 ±1 mV/% input change at 1.2 V_p-p

23°C ±10°C

0.5 V_p-p to 4 V_p-p into 50 Ω in 0.5 V increments;
Continuously variable between calibrated steps; Max. 4.2 V_p-p

9 MHz: Within 2% of indicated amplitude; Constant amplitude 220 MHz to 900 MHz: Within 5% of 9 MHz amplitude

220 MHz to 900 MHz, or 9 MHz

Within 2% of indicated frequency; 9 MHz within 5%

50 Ω ±1%

0 °C to 50 °C

≥100 dB at 10 Hz and 20 Hz, ≥60 dB otherwise

10 Hz, 20 Hz, 100 Hz, 1 kHz, 10 kHz, 20 kHz, 50 kHz, 100 kHz; ±2%

Input to REF port, 7.8±0.5 dB; REF to 75 Ω port, 3.5±0.2 dB

DC to 1 GHz

positive-going step of ~250 mV

max. 19.5 ps, actual value specified on a per-unit basis

>10MHz

×10 ±2% ( ×1 using passive ×10 probe)

1 MΩ //20 pF

75 Ω

rectangular waveform, 100−500 mV_p-p (variable) into 50 Ω

100 W

400 kHz to 1 MHz (variable, uncalibrated)

less than 3 ns (fixed) when terminated into 50 Ω

5.9 kg (13 pounds)

Internal supply: 0 to 50 V variable in three ranges (0.5 V, 5 V, 50 V), positive or negative, or external up to ±300 V

550 to 720 Hz

0.5 ns to 100 ns with a single charge line between the two charge line connectors, or up to 300 ns at half pulse rate with one open-ended charge line (other connector grounded)

250 ps

+1 to −1 V, course and fine control, 0 V when disabled

87 to 128 V_AC (low) or 174 to 250 V_AC (high), 48 to 440 Hz, ≤35 W

+15 V, −15 V, +5 V, −5 V ; ±2% each ; ≤300 mA each

sealed lead-acid gel type

16 h (longer when scope is operating)

12 V, 8 A

95–128 or 185–250 V_AC

6.5 kg (14 lb)

≥10 V (selectable polarity) into 50 Ω

30−250 ns variable with additional calibrated "+1 ns" switch, jitter ≤100 ps

10 Hz to 100 kHz, or by external trigger

<500 ps

400 MHz

5 ns/Div to 500 ms/Div, 1-2-5, ×10 magnifier
(same specs for delayed time base)

DC, AC (>50 Hz), HF Reject (< 30 kHz), LF reject (>80 kHz), TV (line or field)

0.35 Div (int) or 20 mV (ext) to 50 MHz, increasing to 1 Div/150 mV at max. bandwidth

X from center plugin, bandwidth 3 MHz
X-Y phase difference <1° to 1 MHz, <3° to 2 MHz

500 MHz

• gated internal counter (500 MHz bandwidth internal and external)
• internal measurements (RMS, p-p, mean, ...)
• cursors

240 W max

5 ns/Div to 500 ms/Div, 1-2-5, ×10 magnifier
(same specs for delayed time base)

DC, AC (>50 Hz), HF Reject (<30 kHz), LF reject (>80 kHz), TV (line or field)

0.35 Div (int) or 20 mV (ext) to 50 MHz, increasing to 1 Div/150 mV at max. bandwidth

44 pounds (20 kg)