7D20: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
 
(4 intermediate revisions by 2 users not shown)
Line 3: Line 3:
|series=7000-series scopes
|series=7000-series scopes
|type=7D20  
|type=7D20  
|summary=70 MHz Dual-channel digitizer
|summary=70 MHz dual-channel digitizer
|image=tek-7603-7d20.jpg  
|image=tek-7603-7d20.jpg  
|caption=7D20 in [[7603]] mainframe  
|caption=7D20 in [[7603]] mainframe  
|introduced=1982 
|introduced=1982
|discontinued=1992  
|discontinued=1992
|manuals=
|manuals=
* [[Media:070-3205-01.pdf|Tektronix 7D20 Reference Guide]]
* [[Media:070-3205-01.pdf|Tektronix 7D20 Reference Guide]]
* [[Media:070-3857-01.pdf|Tektronix 7D20 Operators Manual]] (OCR)
* [[Media:070-3857-01.pdf|Tektronix 7D20 Operators Manual]] (OCR)
* [[Media:070-3858-01.pdf|Tektronix 7D20 Service Manual]] (OCR) / [http://bama.edebris.com/download/tek/7d20/tek-7D20.pdf @ BAMA]
* [[Media:070-3858-01.pdf|Tektronix 7D20 Service Manual]] (OCR, split schematics, standard resolution)
* [[Media:070-3858-01 lowres.pdf|Tektronix 7D20 Service Manual]] (OCR, whole schematics, low resolution)
* [[Media:070-1728-00.pdf|Tektronix 7D20 Interfacing Guide]]
* [[Media:070-1728-00.pdf|Tektronix 7D20 Interfacing Guide]]
* [[Media:7D20 SMPS AnalysisDFT Apr1984.pdf|EDN Article by Clark Foley and Jim Lamb on SMPS diagnosis featuring the 7D20]]
* [[Media:7D20 SMPS AnalysisDFT Apr1984.pdf|EDN Article by Clark Foley and Jim Lamb on SMPS diagnosis featuring the 7D20]]
Line 23: Line 24:
* U700: [[Media:160-1757-03.bin|160-1757-03]]
* U700: [[Media:160-1757-03.bin|160-1757-03]]
}}
}}
The '''Tektronix 7D20''' is a two-channel digitizing plug-in for [[7000-series scopes]].  It is a triple-width plug-in and provides both vertical and horizontal signals to the scope.   
The '''Tektronix 7D20''' is a two-channel digitizing plug-in for [[7000-series scopes]].  It is a triple-width plug-in and provides both vertical and horizontal signals to the scope. The 7D20 can digitally store waveforms and has a [[GPIB interface]].
 
A special version of the rackmount large screen [[R7603]] exists (Opt. 20), which provides a rear-panel [[GPIB]] connector to be used with the 7D20.   


{{BeginSpecs}}
{{BeginSpecs}}
Line 50: Line 53:
==Internals==
==Internals==


The 7D20 uses an analog shift register (CCD) for high-speed signal acquisition, and then digitizes the stored analog signal at a lower speed (see [[Patent US 4527117A]]).  This design allowed the 7D20 to capture single-shot events at 40 MSamples/s even though this exceeded the speed of ADCs of the time. The 7D20 can digitally store waveforms and has a [[GPIB interface]].  A microprocessor ([[Motorola 6809|68B09]]) in the plug-in controls most of its functions.   
The 7D20 uses an analog shift register (CCD) for high-speed signal acquisition, and then digitizes the stored analog signal at a lower speed (see [[Patent US 4527117A]]).  This design allowed the 7D20 to capture single-shot events at 40 MSamples/s even though this exceeded the speed of ADCs of the time.   A microprocessor ([[Motorola 6809|68B09]]) in the plug-in controls most of its functions.   


The analog waveforms that are sent to the 7000-series mainframe are generated by vertical and horizontal DACs.  The DACs outputs can be calibrated for scaling and shift so that signals are accurately displayed on the oscilloscope screen.   
The analog waveforms that are sent to the 7000-series mainframe are generated by vertical and horizontal DACs.  The DACs outputs can be calibrated for scaling and shift so that signals are accurately displayed on the oscilloscope screen.   

Latest revision as of 09:57, 7 December 2023

Tektronix 7D20
70 MHz dual-channel digitizer
7D20 in 7603 mainframe

Compatible with 7000-series scopes

Produced from 1982 to 1992

Manuals
ROM Images
File Pos. Checksum
(All manuals in PDF format unless noted otherwise)
Manuals – Specifications – Links – Pictures

The Tektronix 7D20 is a two-channel digitizing plug-in for 7000-series scopes. It is a triple-width plug-in and provides both vertical and horizontal signals to the scope. The 7D20 can digitally store waveforms and has a GPIB interface.

A special version of the rackmount large screen R7603 exists (Opt. 20), which provides a rear-panel GPIB connector to be used with the 7D20.

Key Specifications

Bandwidth 0–70 MHz (DC), 10 Hz–70 MHz (AC)
Rise time < 5 ns
Sampling Rate 40 MSps
Resolution 8 bit
Deflection 5 mV/Div to 5 V/Div (1–2–5)
Input impedance 1 MΩ // 20 pF
Time base
  • 50 ns/Div — 1 μs/Div: Equivalent Time Mode
  • 2 μs/Div — 200 μs/Div: Extended Real Time Mode
  • 500 μs/Div — 50 ms/Div: Real Time Mode
  • 100 ms/Div — 20 s/Div and External: Roll Mode
External clock < 10 kHz
Memory 2 × 455 cells (alternating) analog / 1024 words digital
Features
  • 2 channels
  • 6 memory banks
  • 2 cursors
Weight 3.9 kg (8.5 lb)

Internals

The 7D20 uses an analog shift register (CCD) for high-speed signal acquisition, and then digitizes the stored analog signal at a lower speed (see Patent US 4527117A). This design allowed the 7D20 to capture single-shot events at 40 MSamples/s even though this exceeded the speed of ADCs of the time. A microprocessor (68B09) in the plug-in controls most of its functions.

The analog waveforms that are sent to the 7000-series mainframe are generated by vertical and horizontal DACs. The DACs outputs can be calibrated for scaling and shift so that signals are accurately displayed on the oscilloscope screen.

The 7D20 has a "roll" mode that emulates a paper roll chart, as if the waveform were being drawn by a pen on the right side of the screen while the paper is being moved to the left at a constant rate. No equivalent to "roll" exists in analog scopes. The Tektronix 2212/2216, 2220/2221/2230 and possibly others also have this feature.

The 7D20 can give NVRAM errors that are often easy to fix.

Links

Pictures

Parts

Some Parts Used in the 7D20

Part Part Number(s) Class Description Used in
155-0196-00 155-0196-00 Monolithic integrated circuit trigger 455 7D20
155-0217-00 155-0216-00 155-0217-00 Monolithic integrated circuit variable-gain transconductance amplifier 335 475 7D20 FG504
2N3958 151-1054-00 151-1054-01 151-1054-02 Discrete component dual n-channel JFET FG503 MR501 M3 PG505 SC501 SC502 SC503 SG502 1450 1501 1502 1503 221 5A23N 5CT1N 577 603 603A 604 604A 605 606 606A 606B 607 607A 620 624 7CT1N 7D15 7D20 851
Motorola 6809 156-1494-00 156-1494-01 Monolithic integrated circuit 8-bit microprocessor 2424L 2440 7D20 DM5120 DM5520 Keithley 193A Keithley 196 Keithley 199