2336: Difference between revisions

2336 (view source)

Revision as of 08:30, 15 November 2021

323 bytes removed , 15 November 2021

no edit summary

Peter

Bureaucrats, Interface administrators, Suppressors, Administrators

36,827

edits

@@ Line 15: / Line 15: @@
 * [[Media:2300_Series_Brochure.pdf| Tektronix 2300 Series Brochure ]] (PDF, OCR)
 }}
-The '''Tektronix 2336''' is a ruggedized portable dual-channel, 100 MHz analog scope.  An A Ext connector (external signal to the A Trigger Generator) on the front panel, B Ext connector (external signal to the B Trigger Generator) on the front cover, and External Z-Axis connector at the rear round out its connectivity.  The front cover also has a 3 ½ digit LCD for delta TIME measurements and B Trigger function.  A 150 MHz modification was available.
+The '''Tektronix 2336''' is a ruggedized portable dual-channel, 100 MHz analog scope. The front cover contains a 3 ½ digit LCD for delta time measurements and B trigger function.  A 150 MHz modification was available.
-Vertical controls were by way of calibrated deflection factors on CH 1 or CH 2 inputs through AC, DC, or GND coupling.  The vertical mode selections are CH 1, ALT, CHOP (~275 kHz), ADD, CH 2, AUTO, X-Y, TRIG VIEW, or BW LIMIT (20 MHz).  Horizontal deflection is controlled by either the calibrated A or B Sweep Generators, or Alternate between the two of the A, and B Delayed Sweep.
+The '''2336YA''' is reportedly the same with only a Curtis [[elapsed time meter]] added, and two [[P6101]] probes included.
-Trigger sources may be VERT MODE, CH 1, CH 2, LINE, EXT, and EXT ÷ 10.  Trigger coupling can be AC, LF REJ, HF REJ, or DC, and can be controlled by amplitude level and slope type.  The Trigger Modes may be set to AUTO, NORM, and SGL SWP.
 {{BeginSpecs}}
-{{Spec | Bandwidth | 100 MHz (≥88 MHz at 2 mV/div) }}
+{{Spec | Bandwidth             | 100 MHz (≥88 MHz at 2 mV/div) }}
-{{Spec | Deflection | 5 mV/div to 5 V/div (1−2−5 sequence), ±3%; Variable control can increase sensitivity to at least 2 mV/div}}
+{{Spec | Deflection            | 5 mV/div to 5 V/div (1−2−5 sequence), ±3%; Variable control can increase sensitivity to at least 2 mV/div}}
-{{Spec | Input Impedance | 1 MΩ ±2% // 20 pF ±10%, 2 channels }}
+{{Spec | Input Impedance       | 1 MΩ ±2% // 20 pF ±10%, 2 channels }}
-{{Spec | Maximum Input Voltage| 400 V (DC + peak AC) or 500 V (p-p ac at ≤ 1 kHz) }}
+{{Spec | Maximum Input Voltage | 400 V (DC + peak AC) or 500 V (p-p ac at ≤ 1 kHz) }}
-{{Spec | Sweep | A Time Base: 0.5 s/div to 50 ns/div, 1−2−5; B Time Base: 50 ms/div to 50 ns/div, 1−2−5; A and B ×10 magnifier extends max sweep to 5 ns/div }}
+{{Spec | Sweep                 | A Time Base: 0.5 s/div to 50 ns/div, 1−2−5; B Time Base: 50 ms/div to 50 ns/div, 1−2−5; A and B ×10 magnifier extends max sweep to 5 ns/div }}
-{{Spec | Trigger Source| VERT MODE, CH 1, CH 2, LINE, EXT, and EXT ÷ 10 }}
+{{Spec | Trigger Source        | VERT MODE, CH 1, CH 2, LINE, EXT, and EXT ÷ 10 }}
-{{Spec | Trigger Coupling| AC, LF REJ, HF REJ, or DC }}
+{{Spec | Trigger Coupling      | AC, LF REJ, HF REJ, or DC }}
-{{Spec | Probes| Two [[P6108A]] 100 MHz ×10 probes, BNC connector with a readout pin }}
+{{Spec | Vertical modes        | CH1, ALT, CHOP (~275 kHz), ADD, CH2, AUTO, X-Y, TRIG VIEW, or BW LIMIT (20 MHz) }}
-{{Spec | Power| 40 W max, 90 − 250 V<sub>AC</sub>, 48 − 440 Hz }}
+{{Spec | Horizontal modes      | A or B Sweep, A/B Alternate, B Delayed, X-Y }}
+{{Spec | Extra inputs          | A Trigger Ext (front), B Trigger Ext (front), External Z-Axis (rear)
+{{Spec | Probes                | Two [[P6108A]] 100 MHz ×10 probes, BNC connector with a readout pin }}
+{{Spec | Power                 | 40 W max, 90 − 250 V<sub>AC</sub>, 48 − 440 Hz }}
 {{EndSpecs}}
@@ Line 42: / Line 43: @@
 </gallery>
- [[Category:2300 series scopes]]
+{{Custom ICs|2336}}
+[[Category:2300 series scopes]]