7S11: Difference between revisions
No edit summary |
No edit summary |
||
Line 21: | Line 21: | ||
For operation, a [[7T11]] or [[7S12]] plug-in is needed, to which the 7S11 connects through | For operation, a [[7T11]] or [[7S12]] plug-in is needed, to which the 7S11 connects through | ||
contact strips on the right side of the plug-in. The control signals are routed to a similar | contact strips on the right side of the plug-in. The control signals are routed to a similar | ||
strip on the left of the module for another 7S11 in a dual-channel or X-Y | strip on the left of the module for another 7S11 in a dual-channel configuration. | ||
An alternative configuration consists of a pair of 7S11s, one in the right vertical and the other | |||
in the A or only horizontal bay, for an X-Y display in free-running mode. | |||
{{BeginSpecs}} | {{BeginSpecs}} | ||
Line 38: | Line 40: | ||
==Links== | ==Links== | ||
* [[Media:Tekscope 1970 V2 N1 Feb 1970.pdf | Tekscope Vol. 2 No. 1, Feb 1970]] | * [[Media:Tekscope 1970 V2 N1 Feb 1970.pdf | Tekscope Vol. 2 No. 1, Feb 1970]] | ||
* [http://www.amplifier.cd/Test_Equipment/Tektronix/Tektronix_7000_series_special/7S11.htm | * [http://www.amplifier.cd/Test_Equipment/Tektronix/Tektronix_7000_series_special/7S11.htm Tektronix 7S11 @ amplifier.cd] | ||
* http://www.barrytech.com/tektronix/tek7000/tek7s11.html | * [http://www.barrytech.com/tektronix/tek7000/tek7s11.html Tektronix 7S11 @ barrytech.com] | ||
==Pictures== | ==Pictures== |
Revision as of 04:24, 18 July 2015
The Tektronix 7S11 is a sampling plug-in for 7000-series scopes.
It takes one S-series sampling head, e.g. S-4 or S-6, to form a complete vertical plug-in. Bandwidth and sensitivity are determined by the sampling head, not the plug-in.
For operation, a 7T11 or 7S12 plug-in is needed, to which the 7S11 connects through contact strips on the right side of the plug-in. The control signals are routed to a similar strip on the left of the module for another 7S11 in a dual-channel configuration. An alternative configuration consists of a pair of 7S11s, one in the right vertical and the other in the A or only horizontal bay, for an X-Y display in free-running mode.
Key Specifications
Deflection factor | 2 to 200 in 1-2-5 sequence, unit as labelled on the sampling head (usually mV, except for the optical-input S-42 scaled in mW) |
---|---|
DC Offset range | +/- 1 V |
Offset output | 10 × offset voltage, source impedance 10 kΩ |
Vertical signal output | 200 mV/Div, max. 2.4 Vp-p, source impedance 10 kΩ |
Delay range | at least 10 ns |
Weight | 0.9 kg (3.25 lbs) |
Internals
The 7S11 does not contain integrated circuits (except dual transistors).
Links
Pictures
-
7S11 with inserted S-4 head
-
7S11 with empty plugin bay
-
7S11 with inserted S-6 sampling head
-
spring-loaded contact block (right)
-
right side, cover removed
-
left side, cover removed
-
right side
-
left side