067-0590-00: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 8: Line 8:
When used with 560-Series Oscilloscopes other than the [[568]], connector P-23 must be removed from the rear panel of the unit.  
When used with 560-Series Oscilloscopes other than the [[568]], connector P-23 must be removed from the rear panel of the unit.  
A holder is provided for storing the connector when not in use.
A holder is provided for storing the connector when not in use.
* [[Media:062-1051-00.pdf|Tektronix 067-0590-00 Manual (PDF, OCR)]]


[[Category:Calibration fixtures]]
[[Category:Calibration fixtures]]

Revision as of 06:35, 15 January 2019

The Tektronix 067-0590-00 is a Plug-In Extender designed for use with the Type 568 oscilloscope when calibrating or troubleshooting the Type 3S5 or 3S6 Programmable Vertical Plug-In. The Extender can also be used with the Type 568 or other 560-Series Oscilloscopes to extend digital vertical plug-in units, as well as non-digital vertical and time-base units.

The 067-0591-00 is similar and intended for the Type 3T5 or 3T6 programmable Time Base. When used with 560-Series Oscilloscopes other than the 568, connector P-23 must be removed from the rear panel of the unit. A holder is provided for storing the connector when not in use.