1,192
edits
2782: Difference between revisions
no edit summary
No edit summary |
No edit summary |
||
| Line 23: | Line 23: | ||
Rear panel inputs are: FREQ REF (IN/OUT) [[BNC connector]] (50Ω; Input signal freq. allowed: 10 MHz ±5 Hz, Input signal amplitude range: 0 dBm to +15 dBm max; Output signal: Nominally 0 dBm at 10 MHz (TTL-compatible), Phase noise allowed: ≤-100 dBc/Hz at 1 Hz offset); TRIG/HORIZ IN [[BNC connector]] (Nom 1 kΩ, or 8.25 kΩ (sweep mode), Input voltage change for triggering: 0.5V P-P, Input voltage for sweep: selectable between 0 V left side to +10 V right side of screen, between -5 V left side to +5 V right side of screen)); ACCESSORY female [[DB15 connector]] (External inputs and outputs); and INSTRUMENT BUS female [[DB9 connector]] (Serial communications but that processors use to communicate with each other and rest of instrument modules). | Rear panel inputs are: FREQ REF (IN/OUT) [[BNC connector]] (50Ω; Input signal freq. allowed: 10 MHz ±5 Hz, Input signal amplitude range: 0 dBm to +15 dBm max; Output signal: Nominally 0 dBm at 10 MHz (TTL-compatible), Phase noise allowed: ≤-100 dBc/Hz at 1 Hz offset); TRIG/HORIZ IN [[BNC connector]] (Nom 1 kΩ, or 8.25 kΩ (sweep mode), Input voltage change for triggering: 0.5V P-P, Input voltage for sweep: selectable between 0 V left side to +10 V right side of screen, between -5 V left side to +5 V right side of screen)); ACCESSORY female [[DB15 connector]] (External inputs and outputs); and INSTRUMENT BUS female [[DB9 connector]] (Serial communications but that processors use to communicate with each other and rest of instrument modules). | ||
Rear panel outputs are: V OUT [[BNC connector]] (50Ω; External display vertical signal output); H OUT (50Ω; External display horizontal signal output); Z OUT [[BNC connector]] (50Ω; External display blanking signal output); IF OUT [[BNC connector]] (50Ω; Amplitude); and PORT 1 [[GPIB interface]] and PORT 2 [[GPIB interface]]. | Rear panel outputs are: V OUT [[BNC connector]] (50Ω; External display vertical signal output); H OUT[[BNC connector]] (50Ω; External display horizontal signal output); Z OUT [[BNC connector]] (50Ω; External display blanking signal output); IF OUT [[BNC connector]] (50Ω; Amplitude); and PORT 1 [[GPIB interface]] and PORT 2 [[GPIB interface]]. | ||
{{BeginSpecs}} | {{BeginSpecs}} | ||