1705: Difference between revisions
No edit summary |
No edit summary |
||
Line 33: | Line 33: | ||
* L-Band: Left Grat. Edge = 900 MHz; Mid Grat. Line = 100 MHz; Right Grat. Edge = 1900 MHz; | * L-Band: Left Grat. Edge = 900 MHz; Mid Grat. Line = 100 MHz; Right Grat. Edge = 1900 MHz; | ||
* 70 MHz: Left Grat. Edge = 45 MHz; Mid Grat. Line = 70 MHz; Right Grat. Edge = 95 MHz }} | * 70 MHz: Left Grat. Edge = 45 MHz; Mid Grat. Line = 70 MHz; Right Grat. Edge = 95 MHz }} | ||
{{Spec | Included Accessories | Instruction Manual; F-type Male Connector to BNC Female Connector Adapter; and Power Cord }} | {{Spec | Included Accessories | Instruction Manual; F-type Male Connector to BNC Female Connector Adapter; and Power Cord }} |
Revision as of 16:20, 10 July 2019
The Tektronix 1705A is a spectrum monitor designed primarily for locating Ku or C-Band satellites and monitoring their signals with a 3 X 4 in. (80 X 100 mm) monochrome CRT display. It operates by using LNB down converters to the L-Band (950 MHz to 1.8 GHz), and monitoring up link transmissions utilizing an Upconverter to the 70 MHz IF (45 MHz to 100 MHz). The resolution bandwidths 10 kHz and 300 kHz provides measurement resolution proportional to the frequency accuracy or span.
The CRT has a graticule that can be lit up or not depending on the internal jumper position. With non-volatile memory (NVRAM) you can save the current front-panel switch settings, at power down, so that the 1705A can come back with the last front-panel setup. The user interface has on-screen frequency readout, as well as, setup menus. The L-Band readout may be reconfigured to display a satellite frequency in the range of 0.9 GHz to 20 GHz.
Rear panel inputs/outputs are: L-BAND INPUT F-Type connector (Female connector used for the 900 – 2000 MHz input of the L-Band rf, which is down converted by a Low-Noise Amplifier/Block Down Converted (LNB) from the received satellite signal; The LNB POWER switch enables or disables an 18 V supply for the Block Down Converted through the L-BAND INPUT connector); 70 MHz INPUT BNC connector (Female connector used for the input of the 45MHz – 100 MHz rf).
Key Specifications
Frequency Ranges | L-Band:950 MHz to 1.8 GHz; 70 MHz band: 45 MHz to 100 MHz |
---|---|
Frequency Span Ranges | L-Band: Full, 10 MHz/div, 1 MHz/div, and 10 kHz/div; 70 MHz: Full, 1 MHz/div, and 100 kHz/div |
Resolution Bandwidth Range | -6 dB bandwidth selections are 300 kHz, and 10 kHz |
RF Input impedance | 75 Ω |
Maximum Safe Input Power | L-Band: -30 dBm; 70 MHz: -20 dBm |
Minimum Signal Input | -80 dBm |
Video Filter | Reduces Video Bandwidth to ≈ 10 kHz |
RF Attenuator Range | No built-in internal attenuation. Apply an external attenuator to keep the maximum safe input power below the rating listed above |
Sweep Speed Range | 20 ms to 200ms, variable |
Displayed Frequencies in FULL Span/Div | {{{2}}} |
Included Accessories | Instruction Manual; F-type Male Connector to BNC Female Connector Adapter; and Power Cord |
Weight | Standard accessories: 3.8 kg (8.5 lbs) |
Power | 90 − 250 VAC, 48 to 66 Hz, 35 W |
Operating Atmospherics | Temperatures: 0 °C to +50 °C; Humidity: 95% for five days; Altitude: Up to 4.8 km (15,000 ft) |
Options
- Opt. 74: White CRT Phosphor
- 1700F00: Plain Cabinet
- 1700F02: Carrying Case
- WFM7F05: Side-by-Side Rack Adapter
- 1700F06: Blank Panel
- 1700F07: Utility Drawer