7603
The Tektronix 7603 is a general-purpose 100 MHz non-storage, large screen scope that takes
two 7000-series vertical plug-ins
and one 7000-series horizontal plug-in.
There is also a rack-mount version, the R7603.
The AN/USM 281C is a ruggedized 7603 without readout (was also known as 7603N Option 11S) that includes two AM-6565 (7A15AN11) single-trace amplifiers, a TD-1085 (7B53AN11) dual time base, and a clip-on front panel cover with probes and accessories.
Key Specifications
Bandwidth | 100 MHz with 7A11, 7A16, 7A17; 110 MHz with 7A19, 70 MHz with 7A18 |
---|---|
Fastest calibrated sweep | 5 ns/Div |
CRT std. | P31 phosphor, 8 × 10 divisions of 1.22 cm (Tek T7400/154-0640-00 tube); 15 kV acceleration (-3/+12); Option 8: P11 phosphor |
CRT Opt. 4 | P31 phosphor, 8 × 10 divisions of 1.0 cm (Tek 154-0672-00 tube); 18 kV acceleration |
CRT Opt. 6 | P31 phosphor, 8 × 10 divisions of 1.22 cm (Tek 154-0673-00 tube, spectrum analyzer graticule) |
Vertical modes | Left / Alt / Add / Chop / Right |
Trigger Source | Left / Vert Mode / Right |
Inputs | Z Axis |
Outputs | Camera power, Vert signal, +Gate, +Sawtooth |
Line Voltage | 100 / 110 / 120 / 200 / 220 / 240 V, +/- 10%, 50—440 Hz |
Power | Max. 170 W |
Weight | 13.6 kg / 30 lb (instrument only) |
Operating Environment | 0°C – +50°C, < 15,000 ft |
Options
Due to the long production time of the 7603 many options were available. As some options became standard (e.g. built-in fan) some numbers where assigned twice. Later models were equipped with an IEC socket, making all Ax options obsolete.
- Opt.1: Without readout (= 7603N)
- Opt.3: Extra EMI shielding
- Opt.4/Opt.13: Maximum-brightness CRT with reduced area (8x10 cm graticule)
- Opt.5: Fan
- Opt.5 (later models): 400 Hz line frequency
- Opt.6: Spectrum analyzer graticule
- Opt.7: Without Signals Out
- Opt.8: P11 phosphor
- Opt.8 (later models): protective front panel cover, 7603 only
- Opt.11S: Ruggedized variant AN/USM 281C, specified at 50 MHz
- Opt.20: Rear GPIB socket for 7D20, removes +Sawtooth, +Gate, vertical signal outputs, R7603 only
- Opt.76: P7 phosphor
- Opt.77: P7 phosphor with spectrum analyzer graticule
- Opt.78: P11 phosphor
Internals
The 7603 was made in various versions for many years, with revisions to some subassemblies like the vertical output amplifier and HV circuits. It uses a linear power supply, a fan is optional. CRT deflection plates are not distributed. The vertical output amplifier is built around a 155-0080-00 hybrid (U450). Other custom Tek ICs used include 155-0011-00 clock & chop blanking (U55), 155-0022-00 vertical channel switch (U214), 155-0022-00 trigger channel switch (U324),and the 7000 series readout system chips.
Modifications
Official Modification 36005 added a ground strap to the vertical amplifier to prevent >1 GHz oscillations.
There was an official Tek mod to add pushbutton illumination for plugins, which involves adding a regulator, but there is also a quick'n'dirty method from Rolynn Prechtl:
I've done multiple units the cheap and dirty way. No additional regulator, no pulling the LVPS to find a place to add extra components and the best part, no cost.
Look for P90 and P10 on the rear edge of the Main Interface ECB (left side as I remember).
Connect P10-1 (gnd) P90-7 or 8 (gnd).
Connect P10-2 (+5V) to P90-4 (+5V).
Two wires and you're done.
Have experienced no problems with the extra current demand from the +5V regulated supply.
Prices
Year | 1973 | 1976 | 1980 | 1984 | 1990 | |
---|---|---|---|---|---|---|
Mainframe only | Catalog price | $1,600 | $1,800 | $2,260 | $2,865 | $4,235 |
2015 value | $8,500 | $7,470 | $6,480 | $6,510 | $7,650 | |
Mainframe with 2 × 7A18 + 7B53 | Catalog price | $3,520 | $3,955 | $5,225 | $6,880 | $10,315 |
2015 value | $18,720 | $16,410 | $14,970 | $15,640 | $18,630 |
Links
- Detailed repair report @ amplifier.cd (German) / (translated)
- Tek 7603 @ barrytech.com
- Catalog page with specs
- Repair Report #2
- Repair Report #3
- Repair Report #4 - 7603 with 7D20
- EB5AGV's Tektronix R7603 / 7D20 page
- Picture of a completely disassembled 7603
Pictures
-
Tektronix 7603, front view
-
R7603
-
7603, left side - center left: vertical amplifier
-
7603, right side - left: calibrator, center left: readout, center right: cover of HV board
-
7603, top view - top: Z axis board, bottom: horizontal amplifier board
-
Interior view of rear panel showing part of LV regulator board (version without fan)
-
Rear view with LV regulator board flipped out (version without fan)
-
Low voltage regulator board
-
Bottom view of backplane. Backplane interconnect board is seen in center, vertical interface and trigger selector piggyback boards on left/top left, logic board on right.
-
Logic board (normally situated on back of main interconnect facing the PSU)
-
Trig Select and Vertical Interface boards
-
Backplane interconnect without Vertical Interface and Trigger Selector piggyback boards
-
7603 Option 8 (blue P11 phosphor)