Microprocessor support table

This is the Tektronix microprocessor support table. It gives the configurations for the cards, probes and software cartridges for disassembly of microprocessor instructions on Tektronix logic analyzers.

A "X" means that the option is not applicable, a "?" means that no information is available or it hasn't been found and "NA" means that the probe is not available.

"Max" means that it supports the maximum speed fro the processor.

Tektronix 1240/1241

Note:

  • All acquisition boards are 1240D2 the 1240D1 cannot be used.
  • If the UPIK 40 harness is listed it means that it is supported, but not required.
  • (*1) means that P6460 probes are always required.
  • (*2) means that P6460 probes are required for CMOS version.
  • (*3) means that P6460 or P6462 probes can be used.
Tektronix 1240/1241 ROM pack and configuration table
Micro- Processor IC package ROM pack Probe adapter Acq. Boards required Acq. Probes required Fastest clock supported
Intel
8080 12RM01 X 2 4*3 Max
8031/8051 12RM99 Opt 03 UPIK 40 2 4*1 12 Mhz
8085 12RM02 X 2 4*3 Max
8086 DIP 12RM03 PM201 3 X 8.0 Mhz
8088 DIP 12RM04 PM201 3 X 8.0 Mhz
80186 LCC/PGA 12RM05 PM202 3 X 8.0 Mhz
80188 LCC/PGA 12RM06 PM202 3 X 8.0 Mhz
80286 LCC/PGA 12RM08 PM204 3 X 10.0 Mhz
8096/7 12RM99 Opt 16 N/A 3 6*1 12 Mhz
Motorola
6800 12RM21 X 2 4*3 Max
6801 12RM99 Opt 05 UPIK 40 2 4*3 Max
6802 12RM22 X 2 4*3 Max
6805(E2) 12RM99 Opt 06 UPIK 40 2 2*1 Max
6805(E3) 12RM99 Opt 07 UPIK 40 2 3*1 Max
6808 12RM23 X 2 4*3 Max
6809 12RM24 X 2 4*3 Max
6809E 12RM24 X 2 4*3 Max
68HC11 12RM99 Opt 08 N/A 2 3*1 Max
68000 DIP 12RM25 PM203 3 None 16 Mhz
68000 PGA 12RM25 PM203 3 None 16 Mhz
68008 DIP 12RM26 PM203 3 None 16 Mhz
68010 DIP 12RM27 PM203 3 None 16 Mhz
68010 PGA 12RM27 PM203 3 None 16 Mhz
68020 12RM31 PM205 3 None 25.0 Mhz
68030 12RM33 ? 3 None 25.0 Mhz
DSP56000/1 12RM99 Opt 17 NA 3 6*1 50 Mhz
Zilog
Z80 12RM41 X 2 4*1 8 Mhz
Z8001/3 12RM42 NA 3 4*3 10 Mhz
Z8002/4 12RM43 X 3 3*3 10 Mhz
Texas instrument
TMS320320/320C25 12RM99 Opt 11 NA 3 5*1 20 Mhz
TMS32010 12RM99 Opt 14 UPIK 40 2 4*1 Max
Hitachi
6301/3 12RM99 Opt 09 UPIK 40 2 4*3 Max
64180R0/R1 12RM99 Opt 12 NA 3 5*1 Max
Other microprocessors
6502/C02 12RM63 X 2 4*2 Max
1802/4/5/6/(A/C/AC/BC) 12RM99 Opt 22 UPIK 40 2 3*1 Max
ADSP2100 12RM99 Opt 17 NA 3 6*1 Max
F9450 12RM62A NA 3 3*3 40 Mhz
MIL-Std 1705A ? ? ? ? 40 Mhz
NSC800 12RM71 X 2 4*1 Max
GM EMC 12RM99 Opt 01 UPIK 40 2 4*3 Max
Other
VAXBI 12RM99 Opt 13 012-1164-00 3 6*3 Max
GPIB 12RM99 Opt 04 103-0209-00 2 2*3 Max

Tektronix 1230

The 1230DPA is required for all DPXXXX probes. All acquisition boards are 1230E1. All the software needs is included with the personality module.

Tektronix 1230
Micro- Processor IC package Probe adapter Acq. Boards required Acq. Probes required Fastest clock supported
Intel
8031/8051 DIP DP8031D 2 None 12 Mhz
8085 DIP PM404 2 None 6 Mhz
8086 DIP DP8086D 3 None 10 Mhz
8087 DIP DP8031D DP8086D ? None ?
8088 DIP DP8086D 3 None 10 Mhz
80186 PGA DP186P 3 None 10 Mhz
80188 PGA DP186P 3 None 10 Mhz
8096/7 PLCC DP96PL 3 None 12 Mhz
80C196 PLCC DP96PL 3 None 12 Mhz
80286 PGA DP286PL 3 None 12.5 Mhz
80287 PGA DP286PL 3 None 12.5 Mhz
80286 PLCC DP286P 3 None 12.5 Mhz
80287 PLCC DP286P 3 None 12.5 Mhz
80386SX PQFP DP386SX 3 None 16 Mhz
80387SX PQFP DP386SX 3 None 16 Mhz
Motorola
6800 DIP PM407 2 None Max
6802 DIP PM407 2 None Max
6809 DIP PM406 2 None 2 Mhz
6809E DIP PM406 2 None 2 Mhz
68HC11 All DPHC11Q 2 None 12 Mhz
68000 DIP DP68KD 3 None 16 Mhz
68000 PGA DP68KP 3 None 16 Mhz
68010 DIP DP68KD 3 None 16 Mhz
68010 PGA DP68KP 3 None 16 Mhz
Zilog
Z80 DIP PM402 2 None Max
Other Microprocessors
6502/C02 DIP PM403 2 None Max
Other
STD PM405 2 None 12.5 Mhz
GPIB DPGPIB Any None 10 Mhz
RS-232 A6740G Any None 19.2 K baud

Tektronix 1225/1220

Note that the configuration table for the 1230 is not the same as the one for it's two predecessors. The internal hardware is different enough that the 1225/1220 can only use external probes. Since the personality modules are the probes the analyzer does not need any acquisition probes.

Tektronix 1225/1220
Micro- Processor IC package Probe adapter Fastest clock supported
Intel
8085 PM404 Max
8086 PM411
8088 PM411
Motorola
6800 PM407
6809 PM406 Max
6809E PM406 Max
68000 PM412
Zilog
Z80 PM402 Max
Other Microprocessor
6502/C02 PM403 Max
Other
STD PM405 Max

Tektronix 1205

Tektronix 1205
Micro- Processor IC package Probe adapter Acq. Boards required Acq. Probes required Fastest clock supported
Zilog
Z80 PM302 X None 4 Mhz
Other
6502/C02 PM303 X None 4 Mhz
General PM301 X None 4 Mhz

Tektronix 7D02

The PM101 is a general purpose probe, it can be defined to work with processors not listed here. Note:

  • "FM" stands for Full mnemonic disassembly.
  • "STD" stands for Standard radices (Hex, Bin, Octal).
Tektronix 7D02
Micro- Processor Support Feature Probe adapter Requires Fastest clock supported
Intel
8031 STD PM101 061-6003-00 Application manual 20 Mhz
8035 STD PM101 061-5999-00 Application manual 20 Mhz
8039 STD PM101 061-5999-00 Application manual 20 Mhz
8048 STD PM101 061-5999-00 Application manual 20 Mhz
8049 STD PM101 061-5999-00 Application manual 20 Mhz
8051 STD PM101 061-6003-00 Application manual 20 Mhz
8080 FM PM101 PM101 Opt 01 20 Mhz
8085 FM PM104 X 10 Mhz
8086 FM PM106 X 8 Mhz
8088 FM PM107 X 5 Mhz
8748 STD PM101 061-5999-00 Application manual 20 Mhz
8751 STD PM101 061-6003-00 Application manual 20 Mhz
Motorola
6800 FM PM102 X 2 Mhz
6801 STD PM101 061-6000-00 Application manual 20 Mhz
6802 FM PM103 X 6 Mhz
6803 STD PM101 061-6000-00 Application manual 20 Mhz
6808 FM PM103 X 6 Mhz
6809 FM PM111 X 8 Mhz
6809E FM PM111 X 8 Mhz
68000 FM PM109 X 10 Mhz
Zilog
Z80 FM PM105 X 6 Mhz
Z8001 FM PM110 X 6 Mhz
Z8002 FM PM108 X 4 Mhz
Texas Instrument
TMS9900 STD PM101 061-6002-00 Application manual 20 Mhz
Other microproscessor
1802 STD PM101 061-6001-00 Application manual 20 Mhz
6502 FM PM101 PM101 Opt 02 20 Mhz
Other
MULTIBUS STD PM112 X 5 Mhz

Tektronix DAS9200

Tektronix DAS9200