1A5: Difference between revisions
No edit summary |
No edit summary |
||
| Line 14: | Line 14: | ||
There is a front-panel jack for direct connection of the Type [[P6046|P6046 Active Differential Probe]]. | There is a front-panel jack for direct connection of the Type [[P6046|P6046 Active Differential Probe]]. | ||
Type 1A5 was [[introduced in 1967]], replacing Types [[W]] and [[Z]], and lasted until the end of the | Type 1A5 was [[introduced in 1967]], replacing Types [[W]] and [[Z]], and lasted until the end of the 500-series scope line in 1974. | ||
==Specifications== | ==Specifications== | ||
Revision as of 17:29, 3 May 2016
Template:Plugin Sidebar 2 The Tektronix Type 1A5 is a differential amplifier plug-in for 500-series scopes.
There is a front-panel jack for direct connection of the Type P6046 Active Differential Probe.
Type 1A5 was introduced in 1967, replacing Types W and Z, and lasted until the end of the 500-series scope line in 1974.
Specifications
Bandwidth is 50 MHz down to 5 mV/div. The maximum differential sensitivity is 1 mV/div, with a bandwidth of 40 MHz. Common-mode rejection is 20,000 to 1 at low frequencies, deteriorating to 200:1 at 20 MHz.
Like most Tektronix differential plug-ins, it has three modes: VA-VC, VA-VB, and VC-VB. VC is controlled by a ten-turn potentiometer and can vary from -5 V to +5 V (0.5 V on the 5 V/div to 20 V/div ranges).please add
