2245

From TekWiki
Revision as of 02:29, 10 April 2022 by Peter (talk | contribs)
Jump to navigation Jump to search
Tektronix 2245
100 MHz portable 4-channel scope
Tektronix 2245

Produced from 1987 to 1995

Manuals
Manuals – Specifications – Links – Pictures

The Tektronix 2245 is a 100 MHz four-channel analog oscilloscope. Channels 1 and 2 are full-featured, whereas 3 and 4 are limited in both deflection factor and coupling, as they are intended mainly for digital and trigger signals.

The 2245 includes features like AUTO SETUP which automatically adjusts vertical, horizontal, and triggering and display controls to provide a stable, triggered display of the waveform in seconds. It offers a dual time base with delayed sweep, and cursor time/voltage measurements with on-screen readout of cursor data and scale factors.

Key Specifications

Bandwidth 100 MHz
Deflection CH 1, CH 2: 2 mV/div to 5 V/div in 1-2-5 seq; CH 3, CH 4: 0.1 V/div and 0.5 V/div, all ±2%; BW limit: 20 MHz ±15%
Vertical modes CH1,2,3,4, CH2 Invert, Add, Alt, Chop (625 kHz)
Input impedance 1 MΩ ±1.0% // 20 pF ±1 pF
Maximum input  400 V (DC + peak AC) or 800 V (p-p ac at ≤ 10 kHz)
Sweep A Time Base: 0.5 s/div to 20 ns/div in 1-2-5 seq; B Time Base: 5 ms/div to 20 ns/div in 1-2-5 seq (×10 magnifier to 2 ns/div)
Trigger DC, Noise Reject, HF Reject, LF Reject, AC, TV Line, TV Field
Trigger modes A Mode: Auto Level, Auto, Norm, TV Line, TV Field, Single Seq. B Mode: Runs After Delay, Auto Level, Norm, TV Line (From A Source)
Cursors Time, Volts
Interface Ext Counter/Timer Base Input connector; Ext Z-Axis Input connector
CRT Acceleration 16.4 (−2.7/+13.7) kV
Probes Two P6109 100 MHz ×10 probes, BNC connector with a readout pin
Power 90 − 250 VAC, 48 − 445 Hz; 100 W max.

Repair Information

Links

Backup Battery in Tek 2245A

Pictures


CRTs used in the 2245

No results


CRTs used in the 2245A

Page Part nos Description Designers Used in
T4656 154-0905-00 CRT 2245A 2246 2246A


Custom ICs used in the 2245

Page Model Part nos Description Designers Used in
M377 M377 165-2129-03 165-2089-06 155-2089-05 amplifier John Addis 11A16 11A32 11A33 11A34 11A52 2245 2245A 2247 2247A 2252 TDS410 TDS420 TDS460 TDS520D TDS540D TDS580D TDS680C TDS684C TDS714L TDS724D TDS754D TDS784D

Custom ICs used in the 2245A

Page Model Part nos Description Designers Used in
155-0322-00 M429 155-0322-00 vertical output amplifier 2245A 2246
156-2654-00 156-2654-00 156-2654-00 ECL "fast logic" 2245A 2246
156-2655-00 156-2655-00 156-2655-00 "slow logic" 2245A 2246
165-2232-01 165-2232-01 165-2232-01 buffer amplifier 2245A
234-0203-20 M376-003 234-0133-20 234-0203-20 234-0238-20 amplifier 2245A 2246
234-0401-20 234-0401-20 234-0401-20 234-0401-21 horizontal preamplifier 2245A 2246
M376-004 M376-004 234-0204-20 234-0239-30 234-0239-31 trigger 2245A 2246
M377 M377 165-2129-03 165-2089-06 155-2089-05 amplifier John Addis 11A16 11A32 11A33 11A34 11A52 2245 2245A 2247 2247A 2252 TDS410 TDS420 TDS460 TDS520D TDS540D TDS580D TDS680C TDS684C TDS714L TDS724D TDS754D TDS784D