2710: Difference between revisions

Latest revision as of 12:40, 29 January 2024

Tektronix 2710

1.8 GHz Spectrum Analyzer

Produced from 1987 to 1993

Manuals

ROM Images

(All manuals in PDF format unless noted otherwise)

Manuals – Specifications – Links – Pictures

The Tektronix 2710 is a spectrum analyzer with a frequency range of 10 kHz to 1.8 GHz.

Key Specifications

Frequency	10 kHz to 1.8 GHz
Frequency Span	10 kHz/div to 100 MHz/div in 1–2–5 sequence, plus 0 Hz and MAX: 180 MHz/div
Resolution Bandwidth	3 kHz, 30 kHz, 300 kHz, and 5 MHz (–6 dB); 300 Hz with Opt. 01
RF Input	50 Ω, max. +20 dBm (0.1 W or 2.2 V) CW, ≤100 V DC (blocking capacitor)
RF Attenuator	0 dB to 50 dB, 2 dB steps
Sensitivity	–117 dBm at 3 kHz RBW, –129 dBm at 3 kHz RBW w/preamp
Reference Level	–70 dBm to +20 dBm; –23 dBmV to +66.9 dBmV
Sweep Speed	2 sec/Div to 1 µs/Div in 1–2–5 sequence
Triggering Modes	Free Run, Internal, External, Line, TV Line, and TV Field
Displayed Average Noise	−66 dBm to −100 dBm
Display Dynamic Range	80 dB
Dynamic Range	≥100 dBm
Internal Calibrator	100 MHz marker at –30 dBm
Weight	Standard accessories: 11.25 kg (<25 lbs); Basic configuration: 9.5 kg (<21 lbs)
Power	90 − 132 V_AC, 48 to 440 Hz; 90 – 250 V_AC, 47 to 63 Hz, 90 W (standard) / 105 W max (with options)
Operating Environment	0 °C to +50 °C; Humidity: MIL-T-28800E; Altitude: Up to 4.6 km (15,000 ft)
Features	28KB non-volatile memory (NVRAM) for up to 18 displays of waveforms and markers, and up to 9 front panel setups, user-defined key programs, and antenna factor tables Single and delta markers for readout of frequency and amplitude analog display capability, TV Line and TV Field triggering to provide demodulation of video carriers internal audio amplifier and AM/FM detectors digital storage (positive peak only, positive/negative peak, max hold, waterfall) alternate reference level units (dBm, dBmV, dBV, dBµV, dBµW, and dBµV/m) direct plot/print via Opt. 03 GPIB or Centronics interface Opt. 09

Options

Opt. 01: 300 Hz Resolution Bandwidth filter; Phase-lock with span/div ≤20 kHz
Opt. 02: Frequency Counter, 1 Hz or 1 kHz, menu selectable
Opt. 03: GPIB Interface (cannot be combined with Opt. 09)
Opt. 04: TG Tracking Generator, 100 kHz to 1.8 GHz (cannot be combined with Opt. 14)
Opt. 06: Battery Power Option (2704 Inverter and 2705 Battery Pack)
Opt. 08: Replace GPIB with RS-232-C (cannot be combined with Opt. 03)
Opt. 09: Centronix interface (cannot be combined with Opt. 03)
Opt. 10: Video Monitor mode
Opt. 11: Non-volatile RAM storage for setups, displays, and user-definable key sequences
Opt. 14: Adds Resolution Bandwidths of 1 kHz, 10 kHz, 100 kHz, and 1 MHz (cannot be combined with Opt. 04)
Opt. 15: Tek 1405 TV Sideband Adapter interface installed at J101 as SMA female
Opt. 30: Rackmount
Opt. 33: Travel Line Package
Opt. 34: Portable to Rackmount Adapter.

See also the 2706 preselector and 2707 tracking generator.

Connectors

Front panel: RF INPUT N connector (50 Ω, +20 dBm Max, 100 V DC blocking capacitor); GEN N connector (50 Ω, 0 to -48 dBm, Opt. 4 Tracking Generator generates a sweep frequency to enable the Spectrum Analyzer to make circuit response measurements, i.e. scalar network analysis).

Rear panel: J101 SMA connector (Female SMA installed for Opt. 15), J102 EXT TRIG BNC connector (10 kΩ, 35 V (DC + peak AC)), J103 DB9 connector (Accessory connector, not RS-232: Pin 1 Video Input, Pin 2 Ground, Pin 3 Video Output, Pin 6 Sweep Gate, Pin 7 Sweep Output, all others unused), J104 GPIB connector

Links

Documents Referencing 2710

Document	Class	Title	Authors	Year	Links
26W-7045.pdf	Application Note	Random Noise Measurement with the Spectrum Analyzer	Morris Engelson	1989	2710 • 2754P

Pictures

@@ Line 1: / Line 1: @@
-{{Oscilloscope Sidebar |
+{{Instrument Sidebar
-title=Tektronix 2710 |
+|class=Spectrum Analyzer
-summary=Spectrum Analyzer 10 kHz to 1.8 GHz |
+|manufacturer=Tektronix
-image= Tek_2710_Waveform_image.jpg |
+|model=2710
-caption=Tektronix 2710 |
+|summary=1.8 GHz Spectrum Analyzer
-introduced=1987 |
+|image= Tek_2710_Waveform_image.jpg
-discontinued=1993 |
+|caption=Tektronix 2710
-manuals=
+|introduced=1987
-* [[Media:tek_2710_operator.pdf| Tektronix 2710 Operators Manual (PDF, OCR)]]
+|discontinued=1993
-* [[Media:Tektronix_2710_Spectrum_Analyser_Service_Manual.pdf| Tektronix 2710 Service Manual (PDF, OCR)]]
+|manuals=
-* [[Media: tek_2710_gpib_programmer.pdf| Tektronix 2710 GPIB Programmers Manual (PDF, OCR)]]
+* [[Media:070-6022-02.pdf|Tektronix 2710 Operators Manual]] (OCR)
+* [[Media:070-6023-00.pdf|Tektronix 2710 GPIB Programmers Manual]] (OCR)
+* [[Media:070-6024-01.pdf|Tektronix 2710 Service Manual]] (OCR)
+* [[Media:Tek 2710 option 04 manual change info.pdf|Tektronix 2710 Option 04 Manual Change Information]]
+* [[Media:Mod 2710F04 opt04 internal tracking gen.pdf]]
+* [[Media:Tek 2710 normalizations.pdf|Tektronix 2710 Normalizations]]
+{{ROM Images}}
+* [[Media:160-5427-11.bin|160-5427-11.bin]] U320
+* [[Media:160-5428-11.bin|160-5428-11.bin]] U220
+* [[Media:160-5429-11.bin|160-5429-11.bin]] U120
+* [[Media:160-5430-00.bin|160-5430-00.bin]] U312
+* [[Media:160-5434-11.bin|160-5434-11.bin]] U410
+* [[Media:160-5435-11.bin|160-5435-11.bin]] U420(?)
+* [[Media:160-6852-11.bin|160-6852-11.bin]] U420(?)
+* [[Media:Tek2710-ROMs-All.zip|ZIP file of EPROM and PLD images]]
 }}
+The '''Tektronix 2710''' is a spectrum analyzer with a frequency range of 10 kHz to 1.8 GHz.
-The '''Tektronix 2710''' is a spectrum analyzer with a frequency range of 10 kHz to 1.8 GHz in coax.  The minimum resolution bandwidth is 3 kHz, and provides measurement resolution proportional to the frequency accuracy or span.   With non-volatile memory (NVRAM) at 28 kB can save up to 18 displays of waveforms and markers, and up to 9  front panel setups, large user-defined key programs, and antenna factor tables.
-The single and delta markers provide direct readout of frequency and amplitude information of any point along any displayed trace.  Or, get the relative (delta) frequency and amplitude information between any two points along any displayed trace or between traces.
-True analog display capability, along with fast sweep speeds and TV Line and TV Field triggering provide demodulation of video carriers for making depth-of-modulation checks or looking at special baseband data, VITS, and other signals.  An internal audio amplifier and AM/FM detectors let one hear demodulated signals, using either the build-in speaker or headphone jace for signal identification and troubleshooting and in communications applications.
-Additional features include Digital Storage Display (selectable acquisition modes of positive peak only, positive/negative peak, Max hold, Waterfall, and an analog sweep when digital storage is off), Ensemble Averaging, Internal Preamp, Internal Calibrator (accessed through Input Menu), Alternate Reference Level Units (dBm, dBmV, dBV, dBµV, dBµW, and dBµV/m), User-Definable Power-on Status, Center Measure, Graticule Illumination (for CRT photography), and Direct Plot/Print (Printers via Opt. 03 GPIB, or Centronics interface via Opt. 09).
-Front panel inputs/outputs are: RF INPUT [[N connector]] (50Ω, +20 dBm Max, 100 V DC blocking capacitor); and GEN [[N connector]] (50Ω, 0 to -48 dBm, Opt. 4 Tracking Generator generates a sweep frequency to enable the Spectrum Analyzer to make circuit response measurements, i.e. scalar network analysis).
-Rear panel inputs/outputs are: J101 [[SMA connector]] (Female SMA installed for Opt. 15), J102 EXT TRIG [[BNC connector]] (10 kΩ, 35V (DC + peak AC)), J103 [[DB9 connector]] (Not RS-232 compatible.  Accessory connector: Pin 1 Video Input, Pin 2 Ground, Pin 3 Video Output, Pin 6 Sweep Gate, Pin 7 Sweep Output, all others unused), J104 [[GPIB connector]] (Digital Communication Port.  IEEE Std 488 connector.)   .
 {{BeginSpecs}}
-{{Spec | Frequency Range | 10 kHz to 1.8 GHz }}
+{{Spec | Frequency | 10 kHz to 1.8 GHz }}
-{{Spec | Frequency Span Range (plus 0 Hz and MAX: 180 MHz/div) | 10 kHz/div to 100 MHz/div in 1, 2, 5 sequence }}
+{{Spec | Frequency Span | 10 kHz/div to 100 MHz/div in 1–2–5 sequence, plus 0 Hz and MAX: 180 MHz/div }}
-{{Spec | Resolution Bandwidth Range | 6 dB bandwidth selections are 3 kHz, 30 kHz, 300 kHz, and 5 MHz ; Down to 300 Hz with Opt. 01}}
+{{Spec | Resolution Bandwidth | 3 kHz, 30 kHz, 300 kHz, and 5 MHz (–6 dB); 300 Hz with Opt. 01  }}
-{{Spec | RF Input impedance | 50 Ω }}
+{{Spec | RF Input | 50 Ω, max. +20 dBm (0.1 W or 2.2 V) CW, ≤100 V DC (blocking capacitor) }}
-{{Spec | Maximum Safe Input Power | +20 dBm (0.1 W or 2.2 V) continuous peak, ≤100 V DC blocking capacitor }}
+{{Spec | RF Attenuator | 0 dB to 50 dB, 2 dB steps }}
-{{Spec | RF Attenuator Range | 0 dB to 50 dB, 2 dB steps }}
+{{Spec | Sensitivity | –117 dBm at 3 kHz RBW, –129 dBm at 3 kHz RBW w/preamp }}
-{{Spec | Sensitivity | -117 dBm at 3 kHz RBW, -129 dBm at 3 kHz RBW w/preamp }}
+{{Spec | Reference Level | –70 dBm to +20 dBm; –23 dBmV to +66.9 dBmV }}
-{{Spec | Reference Level Range | -70 dBm to +20 dBm; -23 dBmV to +66.9 dBmV }}
+{{Spec | Sweep Speed | 2 sec/Div to 1 µs/Div in 1–2–5 sequence }}
-{{Spec | Sweep Speed Range | 2 sec/Div to 1 µs/Div in 1, 2, 5 sequence }}
 {{Spec | Triggering Modes | Free Run, Internal, External, Line, TV Line, and TV Field }}
-{{Spec | Displayed Average Noise | −66 dBm to −100 dBm }}
+{{Spec | Displayed Average Noise | −66 dBm to −100 dBm }}
 {{Spec | Display Dynamic Range | 80 dB }}
 {{Spec | Dynamic Range | ≥100 dBm }}
-{{Spec | Internal Calibrator | 100 MHz marker at -30 dBm }}
+{{Spec | Internal Calibrator | 100 MHz marker at –30 dBm }}
-{{Spec | Included Accessories | Operator’s Manual; Power Cord; Front Cover; Adapter 50 Ω N Male to BNC Female, Ω 75 to 50 Ω Minimum Loss Attenuator N Male to BNC Female }}
 {{Spec | Weight | Standard accessories: 11.25 kg (<25 lbs); Basic configuration: 9.5 kg (<21 lbs) }}
-{{Spec | Power | 90 − 132 V<sub>AC</sub>, 48 to 440 Hz; 90 – 250 V<sub>AC</sub>, 47 to 63 Hz.  At 115 V<sub>AC</sub>, 60 Hz, 90 W (standard), 105 W max (with options) }}
+{{Spec | Power | 90 − 132 V<sub>AC</sub>, 48 to 440 Hz; 90 – 250 V<sub>AC</sub>, 47 to 63 Hz,  90 W (standard) / 105 W max (with options) }}
-{{Spec | Operating Atmospherics | Temperatures: 0 °C to +50 °C;  Humidity: MIL-T-28800E; Altitude: Up to 4.6 km (15,000 ft) }}
+{{Spec | Operating Environment | 0 °C to +50 °C;  Humidity: MIL-T-28800E; Altitude: Up to 4.6 km (15,000 ft) }}
+{{Spec | Features |
+* 28KB non-volatile memory (NVRAM) for up to 18 displays of waveforms and markers, and up to 9 front panel setups, user-defined key programs, and antenna factor tables
+* Single and delta markers for readout of frequency and amplitude
+* analog display capability, TV Line and TV Field triggering to provide demodulation of video carriers
+* internal audio amplifier and AM/FM detectors
+* digital storage (positive peak only, positive/negative peak, max hold, waterfall)
+* alternate reference level units (dBm, dBmV, dBV, dBµV, dBµW, and dBµV/m)
+* direct plot/print via Opt. 03 GPIB  or Centronics interface Opt. 09
+}}
 {{EndSpecs}}
-==Options==
+===Options===
+<small>
 * Opt. 01: 300 Hz Resolution Bandwidth filter; Phase-lock with span/div ≤20 kHz
 * Opt. 02: Frequency Counter, 1 Hz or 1 kHz, menu selectable
@@ Line 62: / Line 73: @@
 See also the [[2706|2706 preselector]] and [[2707|2707 tracking generator]].
+</small>
+===Connectors===
+'''Front panel:''' RF INPUT [[N connector]] (50 Ω, +20 dBm Max, 100 V DC blocking capacitor); GEN [[N connector]] (50 Ω, 0 to -48 dBm, Opt. 4 Tracking Generator generates a sweep frequency to enable the Spectrum Analyzer to make circuit response measurements, i.e. scalar network analysis).
+'''Rear panel:''' J101 [[SMA connector]] (Female SMA installed for Opt. 15), J102 EXT TRIG [[BNC connector]] (10 kΩ, 35 V (DC + peak AC)), J103 [[DB9 connector]] (Accessory connector, not RS-232: Pin 1 Video Input, Pin 2 Ground, Pin 3 Video Output, Pin 6 Sweep Gate, Pin 7 Sweep Output, all others unused), J104 [[GPIB connector]]
+==Links==
+{{Documents|Link=2710}}
 ==Pictures==
@@ Line 75: / Line 95: @@
 </gallery>
-[[Category: Spectrum Analyzers]]
+[[Category:Spectrum analyzers]]