485: Difference between revisions
(years) |
No edit summary |
||
| Line 36: | Line 36: | ||
Image:Tektronix 485 oscilloscope5.jpg | Image:Tektronix 485 oscilloscope5.jpg | ||
Image:Tek 485 tq.jpg | Image:Tek 485 tq.jpg | ||
File:USA Tektronix 485 Inside1.jpg | |||
</gallery> | </gallery> | ||
[[Category:400 series scopes]] | [[Category:400 series scopes]] | ||
[[Category:Introduced in 1973]] | [[Category:Introduced in 1973]] | ||
Revision as of 08:04, 18 November 2014
The Tektronix 485 is a dual-trace, portable analog oscilloscope with a maximum bandwidth of 350 MHz. The impedance of the inputs can be set individually to 50 Ω or 1 MΩ. The scope achieves its maximum bandwidth when the inputs are in 50 Ω mode.
The 485 was introduced in March of 1972. It includes a switching power supply and uses custom integrated circuits for most of the gain blocks. Triggering is inplemented with tunnel diodes.
A distinguishing feature – at least in a portable oscilloscope of its period – is the Alternate Horizontal Mode. In this mode, the B timebase is shown in a separate full-width scan, as opposed to the more common Mixed Mode, where the B timebase is shown on the same line as the A timebase, after the delay time. At the same time, the section shown with the B timebase is shown highlighted in the A scan.
The 465, which was introduced after the 485, only received this feature in its "B" incarnation (465B).
Specifications
please add
