7S11: Difference between revisions
No edit summary |
No edit summary |
||
| Line 36: | Line 36: | ||
==Links== | ==Links== | ||
* [[Media:Tekscope 1970 V2 N1 Feb 1970.pdf | Tekscope Vol. 2 No. 1, Feb 1970]] | |||
* [http://www.amplifier.cd/Test_Equipment/Tektronix/Tektronix_7000_series_special/7S11.htm Tek 7S11 page @ amplifier.cd] | * [http://www.amplifier.cd/Test_Equipment/Tektronix/Tektronix_7000_series_special/7S11.htm Tek 7S11 page @ amplifier.cd] | ||
* http://www.barrytech.com/tektronix/tek7000/tek7s11.html | * http://www.barrytech.com/tektronix/tek7000/tek7s11.html | ||
Revision as of 11:11, 3 July 2015
The Tektronix 7S11 is a sampling plug-in for 7000-series scopes.
It takes one S-series sampling head, e.g. S-4 or S-6, to form a complete vertical plug-in. Bandwidth and sensitivity are determined by the sampling head, not the plug-in.
For operation, a 7T11 or 7S12 plug-in is needed, to which the 7S11 connects through contact strips on the right side of the plug-in. The control signals are routed to a similar strip on the left of the module for another 7S11 in a dual-channel or X-Y configuration.
Key Specifications
| Deflection factor | 2 to 200 in 1-2-5 sequence, unit as labelled on the sampling head (usually mV, except for the optical-input S-42 scaled in mW) |
|---|---|
| DC Offset range | +/- 1 V |
| Offset output | 10 × offset voltage, source impedance 10 kΩ |
| Vertical signal output | 200 mV/Div, max. 2.4 Vp-p, source impedance 10 kΩ |
| Delay range | at least 10 ns |
| Weight | 0.9 kg (3.25 lbs) |
Internals
The 7S11 does not contain integrated circuits (except dual transistors).
Links
- Tekscope Vol. 2 No. 1, Feb 1970
- Tek 7S11 page @ amplifier.cd
- http://www.barrytech.com/tektronix/tek7000/tek7s11.html
Pictures
-
7S11 with inserted S-4 head
-
7S11 with empty plugin bay
-
7S11 with inserted S-6 sampling head
-
spring-loaded contact block (right)
-
right side, cover removed
-
left side, cover removed
-
right side
-
left side
