Deflection blanking: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 6: Line 6:
The latter approach is called '''deflection blanking'''.
The latter approach is called '''deflection blanking'''.
Deflection blanking is used in several Tektronix instruments,
Deflection blanking is used in several Tektronix instruments,
including the [[321]], [[422]], [[503]], [[504]], [[506]], [[527]], [[560]], [[561]], [[564]], [[565]], [[567]], and [[661]].
including the [[221]], [[321]], [[422]], [[503]], [[504]], [[506]], [[527]], [[560]], [[561]], [[564]], [[565]], [[567]], and [[661]].




[[Category:Circuits and Concepts]]
[[Category:Circuits and Concepts]]

Revision as of 16:46, 5 November 2018

Oscilloscopes have two main ways to avoid drawing on the screen between traces.

One is to turn off the CRT beam by making the CRT grid negative (e.g., −150 V) relative to the CRT cathode.

Another way is to leave the CRT beam on, but to deflect it away from the CRT phosphor. The latter approach is called deflection blanking. Deflection blanking is used in several Tektronix instruments, including the 221, 321, 422, 503, 504, 506, 527, 560, 561, 564, 565, 567, and 661.